YTL004S Front Knuckle Steel King Pins Technical Set by GPM  [YTL004S]

Axial Racing Yeti XL Steel King Pin For Front Knuckle(AX31046) - 4pcs - GPM YTL004S
Price:
USD$2.50
Brand:
GPM
Model:
YTL004S
GTIN:
4894538243161
Please kindly input your name and email address, we will inform you once we have the restocking.
Write a review

Precision steel king pins for front knuckle

This replacement king pin set is specified for the Axial Racing Yeti XL front knuckle and uses the model identifier YTL004S. The kit contains four steel king pins that accurately locate the knuckle within the hub carrier and are sized to resist the shear loads typical of off-road RC operation.

Service procedure is standard: remove the wheel and knuckle, extract the worn pins, and install the new steel pins ensuring proper seating and axial alignment with existing bearings and fasteners. Verify free rotation of the knuckle and avoid over-torquing adjacent hardware to maintain smooth operation.

Use these pins as direct replacements when restoring worn knuckle interfaces and inspect mating surfaces during scheduled maintenance to preserve steering predictability and suspension behaviour.

Do these pins match the Axial Yeti XL knuckle dimensions?

They are specified for the Axial Racing Yeti XL front knuckle assemblies; check knuckle part number AX31046 to confirm dimensional compatibility prior to installation.

Best practice for seating the pins?

Use a press or controlled tapping with a drift to seat pins evenly, avoid deforming the hub carrier, and verify unobstructed rotation before torqueing surrounding screws.