TXMSF/R/SPS Precision Silver Shock Springs TXMSF/R/SPS by GPM  [TXMSF/R/SPS]

TRAXXAS MAXX MONSTER TRUCK Spare Springs (Silver) For Front/Rear Dampers - 2pc set - GPM TXMSF/R/SPS
Price:
USD$4.90
Brand:
GPM
Model:
TXMSF/R/SPS
GTIN:
4894538328653
Condition:
Brand New
Write a review
alt="TRAXXAS MAXX MONSTER TRUCK Spare Springs (Silver) For Front/Rear Dampers - 2pc set - GPM TXMSF/R/SPS" title="TRAXXAS MAXX MONSTER TRUCK Spare Springs (Silver) For Front/Rear Dampers - 2pc set - GPM TXMSF/R/SPS"
alt="TRAXXAS MAXX MONSTER TRUCK Spare Springs (Silver) For Front/Rear Dampers - 2pc set - GPM TXMSF/R/SPS" title="TRAXXAS MAXX MONSTER TRUCK Spare Springs (Silver) For Front/Rear Dampers - 2pc set - GPM TXMSF/R/SPS"
alt="TRAXXAS MAXX MONSTER TRUCK Spare Springs (Silver) For Front/Rear Dampers - 2pc set - GPM TXMSF/R/SPS" title="TRAXXAS MAXX MONSTER TRUCK Spare Springs (Silver) For Front/Rear Dampers - 2pc set - GPM TXMSF/R/SPS"

Precision replacement springs for MAXX dampers

These silver springs are CNC-checked stamped spring steel supplied as a 2pcs set for TRAXXAS MAXX front or rear dampers and intended for RC-scale shock tuning. They are not for full-size vehicle use.

Preload and effective spring rate are adjusted at the shock by rotating the top cap, allowing fine tuning of initial stiffness and ride height for varying terrain and load conditions. The silver finish provides a clear visual reference against alloy or anodised shock bodies.

Measured characteristics from the supplier: length 85mm, outer diameter 26.8mm, inner diameter 23mm, coil pitch 1.9mm (0.1mm thicker than the original). These dimensions will influence ride height and damping response; verify fitment on your front or rear dampers before installation.

Packing includes

  • Silver Spring - 2pcs

Original Name / Part No:

8966 (Front),8967 (Rear)

Compatible Models

  • Traxxas original dampers
  • GPM Racing dampers

What are the exact dimensions and differences to stock?

Length 85mm, OD 26.8mm, ID 23mm, coil pitch 1.9mm; coil wire thickness is stated 0.1mm greater than the original, which affects initial rate and seat height.

How should I approach tuning with these springs?

Set baseline preload, evaluate response in small increments and adjust shock oil viscosity as needed to balance rebound and compression with the altered spring rate.

Which dampers are validated for fit?

These springs are validated for use with Traxxas original dampers and GPM Racing dampers on TRAXXAS MAXX platforms; confirm seating and cap clearance prior to competition use.