TRX4/TRX6 CNC-Grade Differential Bevel 33T & 12T Pinion for Gearbox Service - TRX41233T by GPM  [TRX41233T]

TRAXXAS TRX4 TRAIL CRAWLER 40CR Steel Differential Bevel Gear 33T & Pinion Gear 12T - GPM TRX41233T
Price:
USD$21.90
Brand:
GPM
Model:
TRX41233T
GTIN:
4894538380385
Please kindly input your name and email address, we will inform you once we have the restocking.
Write a review
alt="TRAXXAS TRX4 TRAIL CRAWLER 40CR Steel Differential Bevel Gear 33T & Pinion Gear 12T - GPM TRX41233T" title="TRAXXAS TRX4 TRAIL CRAWLER 40CR Steel Differential Bevel Gear 33T & Pinion Gear 12T - GPM TRX41233T"

Engineering summary

This replacement kit contains a 33T bevel differential gear and a 12T pinion manufactured from 40CR steel, intended as a precision drivetrain spare for TRX4-series crawlers and compatible TRX6 platforms. The gears are sized to locate within front or rear gearbox housings and transmit torque through the differential assembly with consistent engagement.

Use this set to replace fatigued alloy or polymer gears or when a direct gearbox swap is required. The 40CR material selection balances fatigue resistance and toughness for typical scale crawling loads; examine bearing play and verify correct gear mesh to avoid accelerated wear.

Assembly notes for technicians: demount the gearbox cover, retain original shims and bearing positions, install bevel and pinion in original orientation, measure and set backlash, then confirm smooth rotation across the full range before final sealing. This component is intended for model use only.

Packing includes

  • Diff bevel gear - 1pcs
  • Pinion gear - 1pcs

Original Name / Part No:

8279?8279R

Compatible Models

  • TRAXXAS-1/10 ELECTRIC 4WD TRX4 DEFENDER TRAIL CRAWLER -82056-4
  • TRAXXAS-1/10 ELECTRIC 4WD TRX4 FORD BRONCO TRAIL CRAWLER-82046-4
  • TRAXXAS-1/10 4WD ELECTRIC TRX-4 BLAZER -82076-4
  • TRAXXAS-1/10 AND TRX-4 1972 CHEVROLET K5 BLAZER TRAIL CRAWLER-92086-4
  • TRAXXAS-1/10 AND TRX-4 CHEVROLET K10 TRAIL CRAWLER-92056-4
  • TRAXXAS-1/10 AND TRX-4 CRAWLER EQUIPPED WITH TRAXX-82034-4
  • TRAXXAS-1/10 AND TRX-4 FORD BRONCO TRAIL CRAWLER-92076-4
  • TRAXXAS-1/10 AND TRX-4 FORD F-150 RANGER XLT TRAIL CRAWLER-92046-4
  • TRAXXAS-1/10 AND TRX-4 LAND ROVER DEFENDER TRAIL CRAWLER-82056-4
  • TRAXXAS-1/10 4X4 TRX-4 SPORT HIGH TRAIL EDITION-82044-4
  • TRAXXAS-1/10 TRX-4 SPORT UNASSEMBLED KIT-82010-4
  • TRAXXAS-1/10 TRX-4 SPORT-82024-4
  • TRAXXAS-1/10 TRX-4 UNASSEMBLED KIT-82016-4
  • TRAXXAS-1/10 TRX-6 MERCEDES-BENZ G 63 AMG 6X6-88096-4
  • TRAXXAS-1/10 TRX-6 ULTIMATE RC HAULER-88086-4
  • TRAXXAS-1/10 TRX-6 ULTIMATE RC HAULER-88086-84

A precision 40CR steel bevel and pinion set produced as a direct-fit spare for TRX4 and TRX6 gearboxes, intended to improve durability and maintain consistent gear engagement during service operations. by GPM

What inspection should I perform before installation?

Verify bearing condition for axial and radial play, confirm spline engagement and inspect mating surfaces for nicks. Replace any suspect bearings prior to fitting the new gears.

How should backlash be measured and set?

Rotate the output flange while holding the input fixed, measure total lateral movement at the gear tooth and adjust shims to achieve minimal, even backlash across the mesh for quiet, reliable operation.

Are there recommended lubricants?

Use a suitable diff grease that remains stable under load and does not migrate into bearing seats; avoid heavy, tacky compounds that trap grit and accelerate wear.