TRX4M Axle Weighting Brass Cover TRX4M012AX by GPM  [TRX4M012AX]

TRAXXAS TRX4M FORD BRONCO 97074-1 Brass Front/Rear AXLE Cover - GPM TRX4M012AX
Price:
USD$21.90
Brand:
GPM
Model:
TRX4M012AX
GTIN:
4894538369533
Condition:
Brand New
Write a review
alt="TRAXXAS TRX4M FORD BRONCO 97074-1 Brass Front/Rear AXLE Cover - GPM TRX4M012AX" title="TRAXXAS TRX4M FORD BRONCO 97074-1 Brass Front/Rear AXLE Cover - GPM TRX4M012AX"
alt="TRAXXAS TRX4M FORD BRONCO 97074-1 Brass Front/Rear AXLE Cover - GPM TRX4M012AX" title="TRAXXAS TRX4M FORD BRONCO 97074-1 Brass Front/Rear AXLE Cover - GPM TRX4M012AX"
alt="TRAXXAS TRX4M FORD BRONCO 97074-1 Brass Front/Rear AXLE Cover - GPM TRX4M012AX" title="TRAXXAS TRX4M FORD BRONCO 97074-1 Brass Front/Rear AXLE Cover - GPM TRX4M012AX"
alt="TRAXXAS TRX4M FORD BRONCO 97074-1 Brass Front/Rear AXLE Cover - GPM TRX4M012AX" title="TRAXXAS TRX4M FORD BRONCO 97074-1 Brass Front/Rear AXLE Cover - GPM TRX4M012AX"
alt="TRAXXAS TRX4M FORD BRONCO 97074-1 Brass Front/Rear AXLE Cover - GPM TRX4M012AX" title="TRAXXAS TRX4M FORD BRONCO 97074-1 Brass Front/Rear AXLE Cover - GPM TRX4M012AX"

Brass axle cover for TRX4M platform

This brass axle cover is an aftermarket RC replacement engineered for the TRX4M axle cover positions. It provides axle housing protection and introduces approximately 13 grams of additional mass at the cover to influence differential behaviour and rotational damping during technical driving.

The part is brass and supplied with four cap head screws for direct mounting into the axle cover holes. No additional hardware is required for installation, and the mass distribution is intended to deliver repeatable tuning changes to axle dynamics.

Packing includes

  • Axle cover - 1pcs
  • Cap head screws 1.4*12 - 4pcs

Original Name / Part No:

9738

Compatible Models

  • TRAXXAS-1/18 4WD TRX4M FORD BRONCO-97074-1
  • TRAXXAS-1/18 4WD TRX4M LAND ROVER DEFENDER-97054-1

Use this brass cover to add a precise ballast point and extra housing protection while tuning differential feel on TRX4M 1/18 Ford Bronco and Defender kits; hardware is included for direct front and rear fitting.

What exact mass does the cover add?

The brass cover adds roughly 13 grams at the axle cover location; this mass is measured to give predictable changes to rotational inertia and differential feedback.

How is the part secured to the axle?

The cover is secured using the supplied cap head screws 1.4x12 which fasten into the existing axle cover screw holes for a direct, repeatable fitment.

Will this alter gearing or drivetrain ratios?

No gearing or gear ratios are changed; the component modifies mass distribution at the axle to affect rotational damping and differential feel without altering gear geometry.

Is this compatible with stock TRX4M axle covers?

Yes, the item is designed as a direct replacement for the stock axle cover positions on the TRX4M 1/18 models listed in the compatibility box.