TRX4M 1.0 Adhesive Crawler Tyres with Reinforced Carcass - TRX4MZSP20B by GPM  [TRX4MZSP20B]

TRAXXAS TRX4M FORD BRONCO 1.0 Inch Adhesive Crawler Rubber Tires 60mm X 22mm With Foam Inserts - GPM TRX4MZSP20B
Price:
USD$9.90
Brand:
GPM
Model:
TRX4MZSP20B
Please kindly input your name and email address, we will inform you once we have the restocking.
Write a review
alt="TRAXXAS TRX4M FORD BRONCO 1.0 Inch Adhesive Crawler Rubber Tires 60mm X 22mm With Foam Inserts - GPM TRX4MZSP20B" title="TRAXXAS TRX4M FORD BRONCO 1.0 Inch Adhesive Crawler Rubber Tires 60mm X 22mm With Foam Inserts - GPM TRX4MZSP20B"
alt="TRAXXAS TRX4M FORD BRONCO 1.0 Inch Adhesive Crawler Rubber Tires 60mm X 22mm With Foam Inserts - GPM TRX4MZSP20B" title="TRAXXAS TRX4M FORD BRONCO 1.0 Inch Adhesive Crawler Rubber Tires 60mm X 22mm With Foam Inserts - GPM TRX4MZSP20B"
alt="TRAXXAS TRX4M FORD BRONCO 1.0 Inch Adhesive Crawler Rubber Tires 60mm X 22mm With Foam Inserts - GPM TRX4MZSP20B" title="TRAXXAS TRX4M FORD BRONCO 1.0 Inch Adhesive Crawler Rubber Tires 60mm X 22mm With Foam Inserts - GPM TRX4MZSP20B"
alt="TRAXXAS TRX4M FORD BRONCO 1.0 Inch Adhesive Crawler Rubber Tires 60mm X 22mm With Foam Inserts - GPM TRX4MZSP20B" title="TRAXXAS TRX4M FORD BRONCO 1.0 Inch Adhesive Crawler Rubber Tires 60mm X 22mm With Foam Inserts - GPM TRX4MZSP20B"
alt="TRAXXAS TRX4M FORD BRONCO 1.0 Inch Adhesive Crawler Rubber Tires 60mm X 22mm With Foam Inserts - GPM TRX4MZSP20B" title="TRAXXAS TRX4M FORD BRONCO 1.0 Inch Adhesive Crawler Rubber Tires 60mm X 22mm With Foam Inserts - GPM TRX4MZSP20B"

Technical overview for 1.0 inch TRX4M crawler tyres

Precision-engineered RC replacement tyres sized for 1.0 inch bead wheels on TRAXXAS TRX4M platforms, intended for scale crawling applications. The compound is a soft butyl rubber paired with internal reinforcement and foam inserts to enhance bite and stabilise sidewall deflection at low speeds, improving obstacle conformity while resisting premature tearing.

The tyre construction prioritises carcass reinforcement to increase tear resistance, a purposely snug inner diameter to reduce rim slippage, and a long clamping tongue designed to accept extended fixing hardware for reliable clamping. Foam inserts are supplied as a baseline calibration and may be trimmed or replaced to tune stiffness for vehicle mass and terrain demands.

Installation uses standard 1.0 inch bead-type wheel protocols; these tyres are optimised for traction and deformation control on 1/18 TRX4M crawling platforms rather than sustained high-speed running. For hobbyist use only.

Packing includes

  • Rubber tire (with foam insert) - 4pcs

Compatible Models

  • TRAXXAS-1/18 4WD TRX4M FORD BRONCO-97074-1
  • TRAXXAS-1/18 4WD TRX4M LAND ROVER DEFENDER-97054-1

What measures reduce tyre slip on the rim?

A slightly tight inner diameter is used to minimise relative motion on the rim; cleaning the bead seat and ensuring the rim surface is free of paint flake or debris improves contact and reduces slip.

How should I select or modify foam inserts for performance tuning?

Start with the supplied inserts and assess sidewall deflection under load; increase foam density or add layers for stiffer support on heavier rigs, or trim material and use softer foams to increase conformity on technical rock.

Are there recommended installation practices to ensure even clamping?

Seat the tyre evenly around the bead, align the clamping tongue and tighten fixing screws incrementally in a star pattern where possible to distribute clamp force; using longer fixing screws compatible with the tongue improves retention.