TRX-4 Scale Fuel Tank Opening Detail - TRX4ZSP7 by GPM  [TRX4ZSP7]

TRAXXAS TRX4 TRAIL CRAWLER TRX4 SLA Fuel Tank Opening - 1pc set - GPM TRX4ZSP7
Price:
USD$5.90
Brand:
GPM
Model:
TRX4ZSP7
GTIN:
4894538298246
Condition:
Brand New
Write a review
alt="TRAXXAS TRX4 TRAIL CRAWLER TRX4 SLA Fuel Tank Opening - 1pc set - GPM TRX4ZSP7" title="TRAXXAS TRX4 TRAIL CRAWLER TRX4 SLA Fuel Tank Opening - 1pc set - GPM TRX4ZSP7"
alt="TRAXXAS TRX4 TRAIL CRAWLER TRX4 SLA Fuel Tank Opening - 1pc set - GPM TRX4ZSP7" title="TRAXXAS TRX4 TRAIL CRAWLER TRX4 SLA Fuel Tank Opening - 1pc set - GPM TRX4ZSP7"
alt="TRAXXAS TRX4 TRAIL CRAWLER TRX4 SLA Fuel Tank Opening - 1pc set - GPM TRX4ZSP7" title="TRAXXAS TRX4 TRAIL CRAWLER TRX4 SLA Fuel Tank Opening - 1pc set - GPM TRX4ZSP7"
alt="TRAXXAS TRX4 TRAIL CRAWLER TRX4 SLA Fuel Tank Opening - 1pc set - GPM TRX4ZSP7" title="TRAXXAS TRX4 TRAIL CRAWLER TRX4 SLA Fuel Tank Opening - 1pc set - GPM TRX4ZSP7"

Technical Overview

This SLA 3D printed scale fuel tank opening is engineered for Land Rover/Defender style bodies used on the TRX-4 platform and is designated TRX4ZSP7. The resin print process gives a smooth finish intended for high-detail modelling and accurate visual integration. The part is supplied as a cosmetic detail and is not a functional fuel component.

Installation requires creating a matching aperture in the model shell; ensure cut lines match the part profile for correct alignment. Supplied quantity: 1 pcs.

Compatible Models

  • Suitable for Traxxas TRX-4 Scale and Trail Crawler with Land Rover / Defender Body model 82056-4
  • NOT suitable for TRX4 Tactical Unit model 82066-4

Which body mould is this printed detail intended for?

This detail is intended for bodies that follow the Land Rover/Defender 82056-4 mould profile and will not fit Tactical Unit 82066-4 shells without modification.

What post-processing is recommended for best fit and finish?

Light edge sanding to remove any fine print artifacts and a plastic-compatible primer will improve adhesion and visual consistency for painting or weathering.

How should the shell be prepared for mounting?

Carefully mark the cutout on the shell, trim with a sharp blade or rotary tool, test-fit the component, then secure with a suitable adhesive for resin-to-plastic bonding.