TRX-4 MERCEDES-BENZ G500 Pendulum Axle Weight 23mm Hex TRX4023XBZ by GPM  [TRX4023XBZ]

TRAXXAS TRX4 MERCEDES-BENZ Brass Pendulum Wheel Knuckle AXLE Weight+23mm Hex - 12pc set - GPM TRX4023XBZ
Price:
USD$31.90
Brand:
GPM
Model:
TRX4023XBZ
GTIN:
4894538326758
Condition:
Brand New
Write a review
alt="TRAXXAS TRX4 MERCEDES-BENZ Brass Pendulum Wheel Knuckle AXLE Weight+23mm Hex - 12pc set - GPM TRX4023XBZ" title="TRAXXAS TRX4 MERCEDES-BENZ Brass Pendulum Wheel Knuckle AXLE Weight+23mm Hex - 12pc set - GPM TRX4023XBZ"
alt="TRAXXAS TRX4 MERCEDES-BENZ Brass Pendulum Wheel Knuckle AXLE Weight+23mm Hex - 12pc set - GPM TRX4023XBZ" title="TRAXXAS TRX4 MERCEDES-BENZ Brass Pendulum Wheel Knuckle AXLE Weight+23mm Hex - 12pc set - GPM TRX4023XBZ"
alt="TRAXXAS TRX4 MERCEDES-BENZ Brass Pendulum Wheel Knuckle AXLE Weight+23mm Hex - 12pc set - GPM TRX4023XBZ" title="TRAXXAS TRX4 MERCEDES-BENZ Brass Pendulum Wheel Knuckle AXLE Weight+23mm Hex - 12pc set - GPM TRX4023XBZ"
alt="TRAXXAS TRX4 MERCEDES-BENZ Brass Pendulum Wheel Knuckle AXLE Weight+23mm Hex - 12pc set - GPM TRX4023XBZ" title="TRAXXAS TRX4 MERCEDES-BENZ Brass Pendulum Wheel Knuckle AXLE Weight+23mm Hex - 12pc set - GPM TRX4023XBZ"

Brass pendulum wheel weight for TRX4

This RC-scale pendulum wheel weight set is engineered for TRX4 MERCEDES-BENZ platforms and mounts to the outer case of front and rear knuckle arms, fitting a 23mm hex. The assembly employs a central rolling bearing with a Delrin collar and a tapered pendulum profile that locates mass low and outboard, maintaining grip and reducing axle lift during articulation in technical crawling conditions.

The component increases wheel hex diameter to 23mm and concentrates downward mass at each wheel to enhance low-speed stability and angle capability when negotiating depressions or steep obstacles. It is specified for RC wheels with a 58mm inner diameter and a 5mm wheel thread hole. The mass of a single pendulum plus hex is documented as 225 grams in the product literature supplied with the kit.

Packing includes

  • Pendulum Wheel Weight - 2pcs
  • 23mm Hex Adapter - 2pcs
  • M4x2.5x11 Screw Pin - 2pcs
  • 5mm Spring Steel Shims - 2pcs
  • 5mm Metal Washer - 2pcs
  • 20mm Stainless Steel Hex Socket Screws - 2pcs

Compatible Models

  • TRAXXAS TRX-4 MERCEDES-BENZ G500 82096-4

Install this pendulum weight set where additional low-mounted, outboard mass will improve articulation traction and angle support on TRX-4 MERCEDES-BENZ platforms; confirm wheel ID and thread hole compatibility before assembly.

What engineering features define this pendulum assembly?

A central rolling bearing combined with a Delrin collar and a tapered pendulum profile keeps rotating mass low and allows controlled swing to shift the centre of gravity downward under articulation.

Which wheel and fastener dimensions are required?

The kit is intended for wheels with a 58mm inner diameter and a 5mm wheel thread hole; it includes M4 pins and 20mm stainless hex socket screws for secure attachment to the 23mm hex adapters.

How does the added mass affect suspension setup?

Expect increased low-speed traction and a lower effective roll centre at the wheel ends; adjust spring preload or damping if required to rebalance handling for on-road versus technical crawling conditions.

Are the materials chosen for durability?

Brass pendulum weights and stainless fasteners are selected for corrosion resistance and durability in off-road use, while the Delrin collar offers low friction and wear resistance around the bearing.