TRAXXAS X-MAXX/XRT Aluminium Gear Cover TXM038GC by GPM  [TXM038GC]

TRAXXAS 1/8 X-Maxx Aluminium Gear Cover - 1pc set - GPM TXM038GC
Price:
USD$50.90
Brand:
GPM
Model:
TXM038GC
GTIN:
4894538237320
Condition:
Brand New
Write a review
alt="TRAXXAS 1/8 X-Maxx Aluminium Gear Cover - 1pc set - GPM TXM038GC" title="TRAXXAS 1/8 X-Maxx Aluminium Gear Cover - 1pc set - GPM TXM038GC"
alt="TRAXXAS 1/8 X-Maxx Aluminium Gear Cover - 1pc set - GPM TXM038GC" title="TRAXXAS 1/8 X-Maxx Aluminium Gear Cover - 1pc set - GPM TXM038GC"
alt="TRAXXAS 1/8 X-Maxx Aluminium Gear Cover - 1pc set - GPM TXM038GC" title="TRAXXAS 1/8 X-Maxx Aluminium Gear Cover - 1pc set - GPM TXM038GC"
alt="TRAXXAS 1/8 X-Maxx Aluminium Gear Cover - 1pc set - GPM TXM038GC" title="TRAXXAS 1/8 X-Maxx Aluminium Gear Cover - 1pc set - GPM TXM038GC"
alt="TRAXXAS 1/8 X-Maxx Aluminium Gear Cover - 1pc set - GPM TXM038GC" title="TRAXXAS 1/8 X-Maxx Aluminium Gear Cover - 1pc set - GPM TXM038GC"
alt="TRAXXAS 1/8 X-Maxx Aluminium Gear Cover - 1pc set - GPM TXM038GC" title="TRAXXAS 1/8 X-Maxx Aluminium Gear Cover - 1pc set - GPM TXM038GC"
alt="TRAXXAS 1/8 X-Maxx Aluminium Gear Cover - 1pc set - GPM TXM038GC" title="TRAXXAS 1/8 X-Maxx Aluminium Gear Cover - 1pc set - GPM TXM038GC"

Technical Overview - Aluminium Gear Cover for TRAXXAS X-MAXX/XRT

This aluminium gear cover is supplied as a durable replacement to the stock plastic cover on compatible TRAXXAS 1/5 and 1/6 platforms. It is intended to protect the spur gear and adjacent gearbox area from debris and impact during off-road operation while offering a more rigid mounting surface than the original component.

Install the cover with the included round head screws and verify gear mesh and clearances before final torque to prevent any interference with moving parts. The cover's rigid construction contributes to a firmer gearbox mounting which can be beneficial in high-load scenarios; always confirm fitment with the models listed in the compatibility section.

Packing includes

  • Gear cover - 1pcs
  • Round head screw 3x10 - 2pcs

Compatible Models

  • TRAXXAS-1/5 4WD X-MAXX 6S
  • TRAXXAS-1/6 4WD XRT 8S-78086-4

Use this component when a robust, direct-replacement aluminium cover is required for the listed TRAXXAS platforms; validate alignment and gear clearance during installation and secure using the supplied fasteners.

What is the recommended installation check procedure?

Prior to final tightening, rotate the drivetrain by hand to verify no contact between the cover and moving parts, then set gear mesh and torque screws to recommended values.

Does the cover alter mounting geometry?

The cover provides a stiffer mounting surface compared with the original plastic piece; this can reduce movement at the gearbox interface but does not change the original mounting geometry if installed as intended.

Are the supplied fasteners the correct specification?

The package includes two 3x10 round head screws for use with the listed models; if different thread engagement is required replace with equivalent metric fasteners matching thread form and length.