TRAXXAS TRX6 CNC 6061 T6 Front Grille Precision Upgrade - TRX6333F by GPM  [TRX6333F]

TRAXXAS TRX6 MERCEDES-BENZ 88096-4 Aluminum Grille - 3pc set - GPM TRX6333F
Price:
USD$18.90
Brand:
GPM
Model:
TRX6333F
GTIN:
4894538332667
Condition:
Brand New
Write a review
alt="TRAXXAS TRX6 MERCEDES-BENZ 88096-4 Aluminum Grille - 3pc set - GPM TRX6333F" title="TRAXXAS TRX6 MERCEDES-BENZ 88096-4 Aluminum Grille - 3pc set - GPM TRX6333F"
alt="TRAXXAS TRX6 MERCEDES-BENZ 88096-4 Aluminum Grille - 3pc set - GPM TRX6333F" title="TRAXXAS TRX6 MERCEDES-BENZ 88096-4 Aluminum Grille - 3pc set - GPM TRX6333F"
alt="TRAXXAS TRX6 MERCEDES-BENZ 88096-4 Aluminum Grille - 3pc set - GPM TRX6333F" title="TRAXXAS TRX6 MERCEDES-BENZ 88096-4 Aluminum Grille - 3pc set - GPM TRX6333F"
alt="TRAXXAS TRX6 MERCEDES-BENZ 88096-4 Aluminum Grille - 3pc set - GPM TRX6333F" title="TRAXXAS TRX6 MERCEDES-BENZ 88096-4 Aluminum Grille - 3pc set - GPM TRX6333F"
alt="TRAXXAS TRX6 MERCEDES-BENZ 88096-4 Aluminum Grille - 3pc set - GPM TRX6333F" title="TRAXXAS TRX6 MERCEDES-BENZ 88096-4 Aluminum Grille - 3pc set - GPM TRX6333F"
alt="TRAXXAS TRX6 MERCEDES-BENZ 88096-4 Aluminum Grille - 3pc set - GPM TRX6333F" title="TRAXXAS TRX6 MERCEDES-BENZ 88096-4 Aluminum Grille - 3pc set - GPM TRX6333F"

Precision CNC aluminium grille for TRX6

This precision CNC aluminium front grille is produced for the TRAXXAS TRX6 MERCEDES-BENZ 88096-4 and is listed under model TRX6333F. Machined from 6061 T6 billet, the component is profile-cut to reflect authentic metal grille geometry while controlling mass for crawler balance.

The assembly mounts to the vehicle front and includes stainless steel fasteners. It is specified as a cosmetic and protective upgrade, providing a stiffer front fascia than thin polymer parts and improving resistance to deformation during trail use.

Installation notes for technicians: attach using the supplied mounting screws, verify hole alignment and datum points on the chosen body shell, and perform minimal trimming of body tabs where required to ensure flush seating. This product is for scale RC applications only.

Specifications

  • Item: Aluminum front grille, mounting screws included
  • Material: 6061 T6 aluminum, CNC machined
  • Model Number: TRX6333F
  • Compatibility: TRAXXAS TRX6 MERCEDES-BENZ 88096-4

Engineered for fit and finish on TRX6 scale builds, this GPM-machined grille delivers consistent geometry and improved front-end stiffness; confirm shell alignment during install for best results.

What tolerances are recommended when aligning the grille?

Allow minimal play for body flex but aim for 0.5 to 1.5 mm clearance around mounting holes to avoid stress concentrations; use shims if necessary to achieve parallel seating.

Are the supplied screws stainless and torque-specified?

Supplied hardware is stainless steel round head screws. Tighten to light body-panel torque to avoid stripping or deforming the shell; do not overtighten into thin plastics.

Can this grille be anodised or otherwise finished?

Yes, the 6061 T6 substrate accepts anodising and metal paints after appropriate surface preparation. Consult your finisher for compatible processes and masking to preserve critical fit surfaces.

Is reinforcement needed for heavy-duty trail use?

For extreme off-road contact, consider backing plates or increased mount points to distribute loads; the grille improves stiffness but is not intended as structural crash protection.