TRAXXAS TRX4 Pendulum Wheel Knuckle Weight Assembly with 9mm Hex Adapter TRX4023X by GPM  [TRX4023X]

TRAXXAS TRX4 TRAIL CRAWLER Brass Pendulum Wheel Knuckle Axle Weight + 9mm Hex Adapter -16pc set - GPM TRX4023X
Price:
USD$61.90
Brand:
GPM
Model:
TRX4023X
GTIN:
4894538286755
Condition:
Brand New
Write a review
alt="TRAXXAS TRX4 TRAIL CRAWLER Brass Pendulum Wheel Knuckle Axle Weight + 9mm Hex Adapter -16pc set - GPM TRX4023X" title="TRAXXAS TRX4 TRAIL CRAWLER Brass Pendulum Wheel Knuckle Axle Weight + 9mm Hex Adapter -16pc set - GPM TRX4023X"
alt="TRAXXAS TRX4 TRAIL CRAWLER Brass Pendulum Wheel Knuckle Axle Weight + 9mm Hex Adapter -16pc set - GPM TRX4023X" title="TRAXXAS TRX4 TRAIL CRAWLER Brass Pendulum Wheel Knuckle Axle Weight + 9mm Hex Adapter -16pc set - GPM TRX4023X"
alt="TRAXXAS TRX4 TRAIL CRAWLER Brass Pendulum Wheel Knuckle Axle Weight + 9mm Hex Adapter -16pc set - GPM TRX4023X" title="TRAXXAS TRX4 TRAIL CRAWLER Brass Pendulum Wheel Knuckle Axle Weight + 9mm Hex Adapter -16pc set - GPM TRX4023X"

Precision pendulum weights for TRX4 knuckles

This upgrade kit supplies pendulum-style wheel knuckle weights and a 9mm hex adapter tailored to the TRAXXAS TRX4 platform. It places additional mass at the wheel ends to improve tyre contact and crawling hold on technical lines.

The mechanism uses stainless steel rolling beads to concentrate mass lower in the wheel assembly, producing a consistent downward bias. Added outer-wheel mass helps the tyre sustain traction when the chassis is angled or when a wheel digs into a depression.

Components are brass for the pendulum housings with stainless steel beads and fasteners. Beads are removable to permit incremental calibration of wheel-end mass. Mounting is intended on the outer case of front and rear knuckles so the extra load is applied without altering steering or suspension geometry.

Specifications

  • Item Pendulum wheel knuckle axle weight with 9mm hex adapter, 16 pcs set
  • Material Brass pendulum housing, stainless steel rolling beads and screws
  • Model Number TRX4023X
  • Compatibility TRAXXAS TRX4 TRAIL CRAWLER
  • Weight per piece 108g (with rolling beads installed)
  • Set contents 9mm Hex Adapter - 2 pcs, Stainless Steel Cap Head Screw 2.5x12 - 4 pcs, Stainless Steel Screw Shaft M4x2.5x11.8 - 2 pcs, 5mm Shims - 2 pcs, 5mm Metal Washer - 2 pcs, 10mm Hex Socket Screw - 2 pcs
  • Adjustability 5 removable stainless steel beads, each ~4g, for tuning pendulum weight
  • Adapter note 9mm hex adapter is 4mm wider than original TRX4 hex

Use the brass pendulum assemblies and bead tuning to optimise wheel-end inertia for consistent low-speed crawling performance on TRX4 platforms.

This item is compatible with

  • TRAXXAS TRX4 Defender Trail Crawler

What does each kit include for installation?

The kit includes pendulum housings, two 9mm hex adapters, the specified stainless screws and shafts, shims, washers, 10mm hex socket screws and removable stainless rolling beads as listed in Specifications.

How is adjustability achieved?

Adjustability is via the removable stainless beads inside each pendulum; each bead is approximately 4g and up to five beads are provided for stepwise tuning of wheel-end mass.

Will fitment require geometry changes?

No core steering or suspension geometry changes are required; the units mount to the outer knuckle case so the additional load is applied without modifying primary linkages.

What corrosion resistance do the components have?

Rolling beads and fasteners are stainless steel for improved resistance to moisture and mud, though routine cleaning is recommended to maintain smooth operation.