TRAXXAS T-Maxx 1/10 Precision Nylon 6-Pole Wheel & Tmx1889pw Radial Tyre Set NTMX10200A by GPM  [NTMX10200A]

TRAXXAS 1/10 T-Maxx Monster Truck Nylon Wheels (6 Poles) +Tmx1889pw Radial Tire+Tire Insert With Screws-1pr set - GPM NTMX10200A
Price:
USD$20.56
Brand:
GPM
Model:
NTMX10200A
Please kindly input your name and email address, we will inform you once we have the restocking.
Write a review

Technical replacement wheel and tyre assembly for TRAXXAS T-Maxx

This GPM aftermarket wheel and tyre assembly is specified for TRAXXAS 1/10 T-Maxx chassis and integrates a nylon six-pole wheel design with Tmx1889pw radial tyres, foam inserts and mounting screws supplied as a matched pair. The description below concentrates on fitment accuracy, installation procedure and tuning implications for dedicated hobbyists.

Wheel design and components: the wheel uses reinforced nylon engineered for consistent spoke geometry and precise hub engagement. The six-pole layout aligns with common T-Maxx hex fittings. The Tmx1889pw radial tyres are supplied with inserts to sustain profile under dynamic loads and help preserve consistent contact patch behaviour.

Fit and installation notes: confirm hub hex dimension and wheel offset before installation. Install the tyre over the insert and seat it on the wheel, then secure the assembly with the supplied screws using controlled torque values to protect nylon threads. After mounting, verify suspension clearance and wheel runout before trial runs.

Tuning role: fitting this nylon wheel and radial tyre combination will alter unsprung mass and lateral compliance compared with alternative wheel materials; expect measurable effects on steering response and traction. Plan incremental suspension and driveline adjustments to restore predictable handling on monster truck surfaces.

Specifications

  • Item: Nylon 6-pole wheel with radial tire, insert and screws, 1 pr set
  • Material: Nylon wheel
  • Model Number: NTMX10200A
  • Compatibility: TRAXXAS 1/10 T-Maxx

Engineered as a reliable replacement for TRAXXAS T-Maxx 1/10 applications, this nylon wheel and radial tyre set is suitable for precise setup testing and routine maintenance.

What hub hex sizes are supported?

Verify the wheel hex on your vehicle prior to purchase; the wheel geometry is intended to fit common TRAXXAS T-Maxx hex configurations but exact engagement depends on your hub dimensions.

How should I set torque values for the fixing screws?

Use modest, controlled torque sufficient to clamp the wheel without compressing or stripping nylon threads; recheck after initial runs and avoid overtightening.

Can insert hardness be tuned for different surfaces?

Yes, swapping foam inserts for different densities is an effective method to tune tyre support and sidewall stiffness for varied track conditions and driving styles.

What checks should be done after first fitment?

After first fitment perform a clearance check for suspension and body, confirm runout is within acceptable limits, and do a brief shakedown run to verify screw torque and tyre seating.