TRAXXAS Slash 4x4 Rear CVD Harden Steel #45 12mmx6mm Hex SSLA1277RHST by GPM  [SSLA1277RHST]

TRAXXAS 1/10 Slash 4x4 Harden Steel #45 Rear CVD Drive Shaft With 12mmx6mm Wheel Hex - 8pc set - GPM SSLA1277RHST
Price:
USD$33.90
Brand:
GPM
Model:
SSLA1277RHST
GTIN:
4894538322477
Condition:
Brand New
Write a review
alt="TRAXXAS 1/10 Slash 4x4 Harden Steel #45 Rear CVD Drive Shaft With 12mmx6mm Wheel Hex - 8pc set - GPM SSLA1277RHST" title="TRAXXAS 1/10 Slash 4x4 Harden Steel #45 Rear CVD Drive Shaft With 12mmx6mm Wheel Hex - 8pc set - GPM SSLA1277RHST"
alt="TRAXXAS 1/10 Slash 4x4 Harden Steel #45 Rear CVD Drive Shaft With 12mmx6mm Wheel Hex - 8pc set - GPM SSLA1277RHST" title="TRAXXAS 1/10 Slash 4x4 Harden Steel #45 Rear CVD Drive Shaft With 12mmx6mm Wheel Hex - 8pc set - GPM SSLA1277RHST"
alt="TRAXXAS 1/10 Slash 4x4 Harden Steel #45 Rear CVD Drive Shaft With 12mmx6mm Wheel Hex - 8pc set - GPM SSLA1277RHST" title="TRAXXAS 1/10 Slash 4x4 Harden Steel #45 Rear CVD Drive Shaft With 12mmx6mm Wheel Hex - 8pc set - GPM SSLA1277RHST"

Technical overview

The SSLA1277RHST rear CVD drive shaft set is an 8-piece aftermarket replacement engineered for the TRAXXAS 1/10 Slash 4x4 rear axle. Machined in Harden Steel #45, the CVD geometry preserves rotational smoothness while the retractable segments maintain suspension rocker travel and clearance. The kit also includes a spring steel wheel hex stabiliser to decrease lash during torque events, providing a robust solution for hobbyists focused on upgrade durability and drivetrain response.

Installation notes: these components install at the rear axle position and use the supplied screw pins and O-rings. A controlled teardown of the rear differential and axle housing is required for fitment; inspect pin seating and hex retention as part of the final assembly checks.

Packing includes

  • Item - 8pcs

Original Name / Part No:

6850X+6828X+6854X

Specifications

  • Item: TRAXXAS 1/10 Slash 4x4 Rear CVD Drive Shaft, 8 pcs set
  • Material: Harden Steel #45
  • Model Number: SSLA1277RHST
  • Compatibility: TRAXXAS 1/10 Slash 4x4 (rear axle)

SSLA1277RHST is designed as a precision steel retrofit to increase rear drivetrain durability and reduce play for Slash 4x4 applications; verify alignment and fastener torque during installation for consistent performance.

This item is compatible with

  • TRAXXAS Slash 4X4

What tolerances are critical during fitment?

Ensure pin seating is flush and that the hex stabiliser allows axial play within the recommended clearance. Excessive preload will impede suspension travel and cause binding.

Recommended maintenance after installation?

Inspect O-rings and screw pins after initial runs, retorque fasteners to spec, and monitor hex retention periodically to prevent wear-related looseness.

Are spare parts standardised?

Screw pins and O-rings use common hobby sizes; retain original part numbers from the Packing includes block for accurate replacement ordering.