TRAXXAS Rustler VXL Alloy Front Knuckle RUS021 by GPM  [RUS021]

TRAXXAS 1/10 Rustler VXL Alloy Front Knuckle - 1pr - GPM RUS021
Price:
USD$19.90
Brand:
GPM
Model:
RUS021
GTIN:
4894538137521
Condition:
Brand New
Write a review
alt="TRAXXAS 1/10 Rustler VXL Alloy Front Knuckle - 1pr - GPM RUS021" title="TRAXXAS 1/10 Rustler VXL Alloy Front Knuckle - 1pr - GPM RUS021"
alt="TRAXXAS 1/10 Rustler VXL Alloy Front Knuckle - 1pr - GPM RUS021" title="TRAXXAS 1/10 Rustler VXL Alloy Front Knuckle - 1pr - GPM RUS021"
alt="TRAXXAS 1/10 Rustler VXL Alloy Front Knuckle - 1pr - GPM RUS021" title="TRAXXAS 1/10 Rustler VXL Alloy Front Knuckle - 1pr - GPM RUS021"
alt="TRAXXAS 1/10 Rustler VXL Alloy Front Knuckle - 1pr - GPM RUS021" title="TRAXXAS 1/10 Rustler VXL Alloy Front Knuckle - 1pr - GPM RUS021"
alt="TRAXXAS 1/10 Rustler VXL Alloy Front Knuckle - 1pr - GPM RUS021" title="TRAXXAS 1/10 Rustler VXL Alloy Front Knuckle - 1pr - GPM RUS021"

Precision Alloy Knuckle Description

This alloy front knuckle pair is an aftermarket replacement intended for the TRAXXAS Rustler VXL front steering assembly, supplied for 1/10 scale Rustler VXL models. The components act as the steering pivot, connecting wheel hubs, steering links, and the front suspension upright.

Manufactured to provide a firmer hub mounting surface, the alloy knuckles reduce deflection under lateral loads and help maintain consistent steering geometry during demanding driving conditions. The emphasis is on improved durability and repeatable steering performance while keeping the original suspension layout unchanged.

Installation follows standard front-end servicing: remove the stock knuckles on the Rustler VXL, transfer hubs and associated hardware, and fit the alloy pair. Verify hub seating, steering link alignment, and wheel bearing rotation during reassembly to ensure correct clearances and smooth operation.

Specifications

  • Item Alloy Front Knuckle - 1pr
  • Material Alloy
  • Model Number RUS021
  • Compatibility TRAXXAS 1/10 Rustler VXL

Recommended for hobbyists seeking a robust, direct-replacement knuckle that preserves factory geometry while offering improved rigidity and wear resistance; always confirm fastener and bearing fit during installation.

This item is compatible with

  • TRAXXAS Rustler VXL

What checks should be done before final tightening?

Ensure hubs seat fully against the knuckle faces, confirm steering link geometry, and rotate wheels to verify bearing smoothness prior to final torque.

Are these designed to keep original geometry?

Yes, the knuckles are intended as direct replacements that preserve factory steering and suspension geometry while increasing rigidity at the hub mount.

What hardware should I reuse or replace?

Reusing serviceable pins and screws is acceptable, but inspect for wear and replace any corroded or bent fasteners to ensure secure mounting.

How does alloy affect maintenance?

Alloy knuckles typically require the same routine checks as stock parts: inspect for damage after heavy use, keep fasteners torqued, and confirm bearing condition regularly to maintain steering precision.