TRAXXAS Revo Precision 85mm Adjustable Spring Dampers TRV085N/2 by GPM  [TRV085N/2]

TRAXXAS REVO Alloy Front/Rear Adjustable Spring Dampers (85mm)with Alloy Ball Ends - 2prs set - GPM TRV085N/2
Price:
USD$51.90
Brand:
GPM
Model:
TRV085N/2
GTIN:
4894538207354
Condition:
Brand New
Write a review
alt="TRAXXAS REVO Alloy Front/Rear Adjustable Spring Dampers (85mm)with Alloy Ball Ends - 2prs set - GPM TRV085N/2" title="TRAXXAS REVO Alloy Front/Rear Adjustable Spring Dampers (85mm)with Alloy Ball Ends - 2prs set - GPM TRV085N/2"
alt="TRAXXAS REVO Alloy Front/Rear Adjustable Spring Dampers (85mm)with Alloy Ball Ends - 2prs set - GPM TRV085N/2" title="TRAXXAS REVO Alloy Front/Rear Adjustable Spring Dampers (85mm)with Alloy Ball Ends - 2prs set - GPM TRV085N/2"
alt="TRAXXAS REVO Alloy Front/Rear Adjustable Spring Dampers (85mm)with Alloy Ball Ends - 2prs set - GPM TRV085N/2" title="TRAXXAS REVO Alloy Front/Rear Adjustable Spring Dampers (85mm)with Alloy Ball Ends - 2prs set - GPM TRV085N/2"
alt="TRAXXAS REVO Alloy Front/Rear Adjustable Spring Dampers (85mm)with Alloy Ball Ends - 2prs set - GPM TRV085N/2" title="TRAXXAS REVO Alloy Front/Rear Adjustable Spring Dampers (85mm)with Alloy Ball Ends - 2prs set - GPM TRV085N/2"
alt="TRAXXAS REVO Alloy Front/Rear Adjustable Spring Dampers (85mm)with Alloy Ball Ends - 2prs set - GPM TRV085N/2" title="TRAXXAS REVO Alloy Front/Rear Adjustable Spring Dampers (85mm)with Alloy Ball Ends - 2prs set - GPM TRV085N/2"

Technical summary for Revo adjustable spring dampers

The TRV085N/2 kit contains two pairs of front and rear adjustable spring dampers engineered for TRAXXAS Revo model chassis. Each 85mm damper is fabricated from alloy and fitted with alloy ball ends to replace standard plastic fittings, giving a more robust connection at mounting points for RC-scale use.

These components are intended solely for model vehicles and are fitted into the Revo standard shock positions using the existing shock towers and lower mounts. Stock springs and top caps may be reused unless you choose compatible aftermarket springs; standard hobby tools are sufficient to remove and refit the shocks.

Designed as adjustable spring dampers, they enable suspension preload tuning and ride height adjustment while improving the ball-end interface compared with polymer originals. For expanded tuning, change spring rates or pair with compatible shock cartridges and oil as required.

Specifications

  • Item: Alloy front/rear adjustable spring dampers 85mm with alloy ball ends, 2prs set
  • Material: Alloy
  • Model Number: TRV085N/2
  • Compatibility: TRAXXAS Revo

A practical upgrade to replace fragile plastic shock ends and add modest durability and tuning capability to TRAXXAS Revo models while using stock mounting points and standard spring-based adjustments.

This item is compatible with

  • Traxxas REVO
  • TRAXXAS E-REVO

What should I check for fitment?

Confirm your chassis uses 85mm shocks and standard Revo shock mounts; verify ball stud spacing and tower clearance before installation.

Are the ball ends compatible with standard studs?

Alloy ball ends are sized to mate with standard Revo ball studs; inspect studs for wear and replace if necessary to ensure secure attachment.

Can I reuse my shock internals?

These dampers focus on spring preload and mount durability; reuse your existing spring and cartridge setup if compatible, or fit compatible cartridges and oil for damping changes.

What routine checks are recommended?

Regularly inspect ball ends and mounting hardware for play, check springs for sag, and ensure seals or cartridges are in good condition to maintain consistent suspension behaviour.