TRAXXAS MAXX Aluminium Lower Arms Set for pivot rigidity TXMW055FR TXMW055F by GPM  [TXMW055FR]

Strong lower arms for dependable pivots

These aluminium lower arms are an RC-scale replacement part designed for the TRAXXAS 1/10 4WD MAXX with WideMaxx configuration. They locate the c-hubs and lower damper mounts to form a stable connection between suspension components and the chassis; the goal is consistent fitment rather than changing suspension geometry.

Forged from 6061-T6 aluminium, the arms deliver a firmer mounting surface than factory plastics while keeping weight reasonable. Delrin collars at pivot points cut play and channel load onto the metal pivot. White Delrin shims for the rear arms address slightly larger clearances found on some trucks. The fixings use a locating pin with a short screw to limit the risk of stripped threaded inserts during maintenance. Multiple damper holes permit stepwise adjustments to shock angle and ride height.

Fitment notes: install supplied stainless pins and washers, ensure collars are correctly seated prior to final torque, and apply shims on the rear arms only when necessary to remove lateral movement. Check damper hole selection against your current setup to maintain intended handling.

An aftermarket aluminium option to reduce pivot play and provide consistent damper mounting for TRAXXAS MAXX vehicles; use the included pins and shims for correct assembly.