TRAXXAS MAXX Suspension Screw Pin Set TXMSACC/12 - Stainless Replacement Hardware by GPM  [TXMSACC/12]

TRAXXAS MAXX MONSTER TRUCK Stainless Steel Front+Rear Suspension Screw Pin - 12pc set - GPM TXMSACC/12
Price:
USD$26.90
Brand:
GPM
Model:
TXMSACC/12
GTIN:
4894538329285
Condition:
Brand New
Write a review
alt="TRAXXAS MAXX MONSTER TRUCK Stainless Steel Front+Rear Suspension Screw Pin - 12pc set - GPM TXMSACC/12" title="TRAXXAS MAXX MONSTER TRUCK Stainless Steel Front+Rear Suspension Screw Pin - 12pc set - GPM TXMSACC/12"
alt="TRAXXAS MAXX MONSTER TRUCK Stainless Steel Front+Rear Suspension Screw Pin - 12pc set - GPM TXMSACC/12" title="TRAXXAS MAXX MONSTER TRUCK Stainless Steel Front+Rear Suspension Screw Pin - 12pc set - GPM TXMSACC/12"
alt="TRAXXAS MAXX MONSTER TRUCK Stainless Steel Front+Rear Suspension Screw Pin - 12pc set - GPM TXMSACC/12" title="TRAXXAS MAXX MONSTER TRUCK Stainless Steel Front+Rear Suspension Screw Pin - 12pc set - GPM TXMSACC/12"

Precision stainless screw pins for TRAXXAS MAXX

This 12-piece set of stainless steel suspension screw pins is supplied for TRAXXAS MAXX assemblies as direct replacements at the original upper and lower arm mounting positions. The pack is intended for routine chassis maintenance where corrosion resistance and consistent clamp are required.

The kit includes three lengths to match arm locations: short outer screws for lower arms, medium inner screws for lower arms, and long outer screws for upper arms. Each fastener uses an internal hex socket for secure tightening with a correctly sized hex driver, helping preserve clamping under the vibration loads typical of monster truck operation. Stainless material improves corrosion resistance versus plated or mild-steel alternatives while maintaining thread integrity for repeated service.

Note: these pins are designed for original arms only and are intended as maintenance and setup hardware, not for applications that change suspension geometry.

Specifications

  • Item Front and rear suspension screw pin set
  • Material Stainless steel
  • Model Number TXMSACC/12
  • Contents Short outer screws for lower arms - 4 pcs, Medium inner screws for lower arms - 4 pcs, Long outer screws for upper arms - 4 pcs
  • Compatibility Suitable for original arms only

Use these stainless pins to replace corroded stock fasteners and to maintain reliable suspension mounts; verify correct lengths and thread engagement during installation and use the appropriate hex driver to protect the internal recess.

This item is compatible with

  • TRAXXAS-1/10 MAXX MONSTER TRUCK-89076-4
  • MAXX W/WIDEMAXX MONSTER TRUCK-89086-4

What tolerances should I expect from the pins?

These pins are manufactured to typical fastener tolerances for replacement hardware; check fit in the arm bore and confirm thread engagement before final torqueing.

Can these be used with aftermarket pivot setups?

They are specified for original arms only; for aftermarket pivot kits verify diameter and overall length and consult the kit documentation to ensure compatibility.

What installation practices prevent socket damage?

Use the correct hex driver, avoid excessive leverage, and ensure the driver is fully seated in the socket before applying torque to prevent rounding the internal recess.

How do I maintain these stainless pins long term?

After wet or salty use rinse and dry the fasteners, inspect threads and the socket for wear, and apply a light corrosion inhibitor if required for extended protection.