TRAXXAS MAXX Precision Aluminium Lower Arms TXMW055F/R by GPM  [TXMW055F/R]

Precision aluminium lower arms engineered for TRAXXAS MAXX

This 14pcs aluminium lower arm kit is specified for the 1/10 TRAXXAS MAXX and Wide MAXX monster trucks and serves as an aftermarket replacement for both front and rear lower arms. The arm bodies are 6061-T6 aluminium and the set includes the stainless pins, screws, washers and white Delrin 4mm shims required to mount to C-hubs and suspension mounts.

Technical notes for installation and setup: Delrin collars are provided to reduce slop at pivot points and the white 4mm Delrin shims compensate for the wider rear gap when installing rear arms. The pin-and-small-screw fixing secures the arms without long thread engagement, and multiple damper-position holes allow incremental changes to damper angle for ride-height and rebound adjustments.

Hardware included in the kit satisfies standard mounting needs and corresponds to the original parts list. Use the supplied stainless pins and 3x18 and 3x8 screws to fasten the arms, and confirm clearance with your motor, ESC and servo prior to final assembly.

Select this aluminium lower arm set to replace worn plastic components and restore controlled pivot fit while retaining damper mounting flexibility on TRAXXAS MAXX platforms.