TRAXXAS MAXX Aluminium Battery Hold-down 6061-T6 TXMS0126 by GPM  [TXMS0126]

TRAXXAS MAXX MONSTER TRUCK Aluminum Battery Hold-down - 2pc set - GPM TXMS0126
Price:
USD$23.90
Brand:
GPM
Model:
TXMS0126
GTIN:
4894538330892
Condition:
Brand New
Write a review
alt="TRAXXAS MAXX MONSTER TRUCK Aluminum Battery Hold-down - 2pc set - GPM TXMS0126" title="TRAXXAS MAXX MONSTER TRUCK Aluminum Battery Hold-down - 2pc set - GPM TXMS0126"
alt="TRAXXAS MAXX MONSTER TRUCK Aluminum Battery Hold-down - 2pc set - GPM TXMS0126" title="TRAXXAS MAXX MONSTER TRUCK Aluminum Battery Hold-down - 2pc set - GPM TXMS0126"
alt="TRAXXAS MAXX MONSTER TRUCK Aluminum Battery Hold-down - 2pc set - GPM TXMS0126" title="TRAXXAS MAXX MONSTER TRUCK Aluminum Battery Hold-down - 2pc set - GPM TXMS0126"
alt="TRAXXAS MAXX MONSTER TRUCK Aluminum Battery Hold-down - 2pc set - GPM TXMS0126" title="TRAXXAS MAXX MONSTER TRUCK Aluminum Battery Hold-down - 2pc set - GPM TXMS0126"
alt="TRAXXAS MAXX MONSTER TRUCK Aluminum Battery Hold-down - 2pc set - GPM TXMS0126" title="TRAXXAS MAXX MONSTER TRUCK Aluminum Battery Hold-down - 2pc set - GPM TXMS0126"
alt="TRAXXAS MAXX MONSTER TRUCK Aluminum Battery Hold-down - 2pc set - GPM TXMS0126" title="TRAXXAS MAXX MONSTER TRUCK Aluminum Battery Hold-down - 2pc set - GPM TXMS0126"
alt="TRAXXAS MAXX MONSTER TRUCK Aluminum Battery Hold-down - 2pc set - GPM TXMS0126" title="TRAXXAS MAXX MONSTER TRUCK Aluminum Battery Hold-down - 2pc set - GPM TXMS0126"
alt="TRAXXAS MAXX MONSTER TRUCK Aluminum Battery Hold-down - 2pc set - GPM TXMS0126" title="TRAXXAS MAXX MONSTER TRUCK Aluminum Battery Hold-down - 2pc set - GPM TXMS0126"
alt="TRAXXAS MAXX MONSTER TRUCK Aluminum Battery Hold-down - 2pc set - GPM TXMS0126" title="TRAXXAS MAXX MONSTER TRUCK Aluminum Battery Hold-down - 2pc set - GPM TXMS0126"
alt="TRAXXAS MAXX MONSTER TRUCK Aluminum Battery Hold-down - 2pc set - GPM TXMS0126" title="TRAXXAS MAXX MONSTER TRUCK Aluminum Battery Hold-down - 2pc set - GPM TXMS0126"

Precision battery hold-down for TRAXXAS MAXX

This CNC-friendly 6061-T6 aluminium hold-down is engineered as an aftermarket retention upgrade for the TRAXXAS MAXX Monster Truck chassis. It replaces the stock strap or plate to deliver improved clamping stiffness and enhanced thermal conduction away from the battery pack.

The kit includes adhesive foam pads to remove tolerance play and damp vibration-induced movement. The patterned faceplate increases exposed surface area for passive cooling while maintaining a low mass solution.

Installation follows standard chassis access procedures: remove the factory strap, align the hold-down to the battery tray mounting points and fasten using the original hardware. Adjust foam placement to ensure firm contact and eliminate battery rotation during jumps and hard cornering.

Original Name / Part No:

8919

Specifications

  • Item: Battery hold-down set, 2 pcs
  • Material: 6061-T6 aluminum
  • Model Number: TXMS0126
  • Compatibility: TRAXXAS MAXX MONSTER TRUCK

Intended for precision-minded hobbyists, this aluminium hold-down improves retention reliability and thermal performance while keeping installation and maintenance straightforward.

What tolerances should I check before fitting?

Verify battery bay width and mounting hole spacing match the hold-down; ensure the pack sits flat and the tray faces are free of debris before final torque.

Can the foam pads be customised?

Yes, the supplied foam can be trimmed to fine-tune pressure distribution and eliminate localised movement without compromising clamp contact.

Does aluminium improve battery cooling?

6061-T6 provides better thermal conduction than plastic parts and the perforated face increases convective airflow, which together help lower surface temperature peaks.

Any fastener recommendations?

Use the factory screws where specified and check for correct thread engagement; replace any damaged fasteners and avoid over-torque to prevent chassis or thread damage.