TRAXXAS E-REVO Differential Carrier Silicone Gasket ER011/P by GPM  [ER011/P]

TRAXXAS E-REVO Silicone Gasket For Differential Carrier - 2pc set - GPM ER011/P
Price:
USD$4.90
Brand:
GPM
Model:
ER011/P
GTIN:
4894538329926
Condition:
Brand New
Write a review
alt="TRAXXAS E-REVO Silicone Gasket For Differential Carrier - 2pc set - GPM ER011/P" title="TRAXXAS E-REVO Silicone Gasket For Differential Carrier - 2pc set - GPM ER011/P"
alt="TRAXXAS E-REVO Silicone Gasket For Differential Carrier - 2pc set - GPM ER011/P" title="TRAXXAS E-REVO Silicone Gasket For Differential Carrier - 2pc set - GPM ER011/P"
alt="TRAXXAS E-REVO Silicone Gasket For Differential Carrier - 2pc set - GPM ER011/P" title="TRAXXAS E-REVO Silicone Gasket For Differential Carrier - 2pc set - GPM ER011/P"

Technical overview of the diff carrier gasket

This 2pcs silicone gasket set is intended as an aftermarket sealing solution for the differential carrier used on TRAXXAS E-REVO scale models and serves as a direct replacement sealing element for the diff housing. The components are supplied under part code ER011/P for hobby-scale applications.

Designed for consistent compression resistance, the silicone material maintains a reliable seal at the carrier mating surfaces while minimising permanent set under normal operating loads. Effective sealing reduces lubricant migration and helps preserve optimal gear and bearing operating conditions during runs.

Recommended installation procedure: thoroughly clean mating surfaces to remove old sealant and contaminants, position the gasket accurately within the carrier recess, and torque the carrier screws evenly to avoid localized compression. Verify the diff rotates freely after assembly and replace the gasket if deformation is observed.

Packing includes

  • Gasket - 2pcs

Original Name / Part No:

3978

This item is compatible with

  • TRAXXAS E-REVO
  • TRAXXAS Slash 4X4
  • TRAXXAS XO 01
  • TRAXXAS SLASH 4X4 LOW CG
Ensure mating faces are flat and free of debris, seat the gasket without twists, and tighten screws in stages to achieve uniform compression across the seal surface.
A resilient silicone gasket reduces oil loss and contamination, which stabilises internal lubrication and reduces the frequency of internal cleaning during maintenance cycles.
Replace the gasket if you observe permanent compression, cuts, or if sealing performance declines and oil leakage is present after correct reassembly.