GPM ER021N Precision Aluminium Knuckle Arms for Traxxas E-Revo  [ER021N]

TRAXXAS E-REVO Aluminum Front/Rear Knuckle Arms - 8pc set - GPM ER021N
Price:
USD$36.90
Brand:
GPM
Model:
ER021N
GTIN:
4894538310849
Condition:
Brand New
Write a review
alt="TRAXXAS E-REVO Aluminum Front/Rear Knuckle Arms - 8pc set - GPM ER021N" title="TRAXXAS E-REVO Aluminum Front/Rear Knuckle Arms - 8pc set - GPM ER021N"
alt="TRAXXAS E-REVO Aluminum Front/Rear Knuckle Arms - 8pc set - GPM ER021N" title="TRAXXAS E-REVO Aluminum Front/Rear Knuckle Arms - 8pc set - GPM ER021N"
alt="TRAXXAS E-REVO Aluminum Front/Rear Knuckle Arms - 8pc set - GPM ER021N" title="TRAXXAS E-REVO Aluminum Front/Rear Knuckle Arms - 8pc set - GPM ER021N"
alt="TRAXXAS E-REVO Aluminum Front/Rear Knuckle Arms - 8pc set - GPM ER021N" title="TRAXXAS E-REVO Aluminum Front/Rear Knuckle Arms - 8pc set - GPM ER021N"
alt="TRAXXAS E-REVO Aluminum Front/Rear Knuckle Arms - 8pc set - GPM ER021N" title="TRAXXAS E-REVO Aluminum Front/Rear Knuckle Arms - 8pc set - GPM ER021N"
alt="TRAXXAS E-REVO Aluminum Front/Rear Knuckle Arms - 8pc set - GPM ER021N" title="TRAXXAS E-REVO Aluminum Front/Rear Knuckle Arms - 8pc set - GPM ER021N"

Precision engineered knuckles for consistent steering geometry

These GPM aluminium knuckle arms are machined to reduce flex at the hub and stabilise the CVD interface on the Traxxas E-Revo. The integrated POM collars firm the bearing seat to lower play and maintain accurate steering under load.

Technical benefits and tuning

  • Material Upgrade: 6061 T6 aluminium paired with POM collars yields improved stiffness and dimensional stability over stock plastic parts.
  • Improved Durability: Delrin lock nuts provide secure clamping and resist loosening in high vibration environments.
  • Secure Bearing Fit: POM inserts reduce bearing migration and isolate bearings from metal-on-metal wear.
  • Adjustable Installation: Multiple mounting holes allow fine tuning of tie rod geometry and knuckle angle to suit track or bashing setups.

Packing includes

  • Kncukle Arm - 2pcs
  • Stainless Steel Round Head Screw 3x20 - 2pcs
  • Delrin Locknut - 4pcs

Compatible Models

  • Traxxas E-Revo

What tolerances should I check during installation?

Verify bearing axial play and ensure the POM collar seats flush; check that tie rod clearance is sufficient across full suspension travel.

Are there recommended torque values for the screws?

Use moderate hand torque for the 3x20 stainless screws and retorque after initial runs; over tightening can distort the POM collars or strip threads.

Which upgrades pair well with these knuckles?

Pair with uprated CVDs and hardened drive cups to fully benefit from the reduced flex and the improved bearing retention these knuckles provide.