TL-01 Hardened Main Gear 34T-24T STL14234T by GPM  [STL14234T]

Tamiya TL01 Harden Steel #45 Main Gear (34T-24T) - 1pc - GPM STL14234T
Price:
USD$14.90
Brand:
GPM
Model:
STL14234T
GTIN:
4894538318296
Condition:
Brand New
Write a review
alt="Tamiya TL01 Harden Steel #45 Main Gear (34T-24T) - 1pc - GPM STL14234T" title="Tamiya TL01 Harden Steel #45 Main Gear (34T-24T) - 1pc - GPM STL14234T"
alt="Tamiya TL01 Harden Steel #45 Main Gear (34T-24T) - 1pc - GPM STL14234T" title="Tamiya TL01 Harden Steel #45 Main Gear (34T-24T) - 1pc - GPM STL14234T"
alt="Tamiya TL01 Harden Steel #45 Main Gear (34T-24T) - 1pc - GPM STL14234T" title="Tamiya TL01 Harden Steel #45 Main Gear (34T-24T) - 1pc - GPM STL14234T"
alt="Tamiya TL01 Harden Steel #45 Main Gear (34T-24T) - 1pc - GPM STL14234T" title="Tamiya TL01 Harden Steel #45 Main Gear (34T-24T) - 1pc - GPM STL14234T"

Precision hardened steel main gear for TL-01

The STL14234T main gear is a hardened steel #45 aftermarket replacement intended for Tamiya TL-01 drivetrains and supplied as a single unit. The gear presents a 34T large face and a 24T small face to match common TL-01 gearbox arrangements.

Designed to transmit drive torque through the gearbox, this unit benefits from hardened material for improved wear resistance. Inspect pinion and bearing condition before installation to ensure correct load distribution and to prevent premature tooth wear.

Installation procedure: remove the gearbox cover, transfer existing shims or spacers as required, install the gear with correct orientation on the shaft, then set backlash and verify rotation under manual and powered checks. No special adapters are required for standard TL-01 maintenance and fitment.

What tolerances should I check during fitment?

Check axial play, end float, and radial runout on the shaft; confirm shims preserve correct axial position and that mesh clearance is uniform across the tooth face.

How to inspect the gear teeth after heavy running?

Look for burrs, nicks or localized pitting on tooth flanks and root; address any damage immediately and verify pinion hardness and alignment to prevent repeat wear.

Recommended maintenance interval?

Inspect the gearbox periodically based on run conditions; endurance checks after high-load sessions will catch early wear and extend service life.