Team Losi Mini-T 2.0 Precision 14T Hardened Steel Pinion LM014T by GPM  [LM014T]

Technical overview of the LM014T pinion

The LM014T pinion is a precision aftermarket component designed to interface with Team Losi Mini-T 2.0 2WD drivetrains. Manufactured from hardened 45# steel, it features a 2mm bore, 0.5mm tooth pitch and 14 teeth to provide consistent engagement and wear characteristics suitable for tuning and repair tasks.

Key fitting notes and installation points:

• Design: hardened 45# steel pinion, 14T, 0.5mm pitch optimized for matching spur gears.
• Bore: 2mm centre hole for motors with a 2mm shaft; verify motor shaft diameter prior to installation.
• Installation: ensure axial alignment on the motor shaft, set accurate gear mesh with the spur gear, torque the set screw to specification and confirm concentricity to minimise runout.
• Tuning role: the 14T count modifies the final drive ratio compared with other sizes, providing a balance between acceleration and top-end speed depending on motor and track demands.
• Included items as supplied: pinion gear (1 pcs) and a 3x3 screw shaft (1 pcs).

This item is intended as an RC drivetrain upgrade or spare part and is not for full-scale vehicle application.