Team Associated RC18T Roadtech 27 Turns Stock Motor MOT0427 by GPM  [MOT0427]

Associated RC 18T Roadtech Stock Motor 0.4m (Dia) 27 Turns 4.8v - 8.4v(High Torque)-1pc - GPM MOT0427
Price:
USD$10.50
Brand:
GPM
Model:
MOT0427
Please kindly input your name and email address, we will inform you once we have the restocking.
Write a review

Technical overview of the RC18T 27T Roadtech motor

This 27 Turns Roadtech motor is designed for compatibility with the Team Associated RC18T platform and supplied as a single unit. It follows the stock motor envelope and is rated to operate between 4.8v and 8.4v, providing higher low-end torque for stock-class on-road applications while retaining standard mounting and electrical interfaces.

Installation aligns with standard RC18T procedures: remove the original motor, install this unit in the same motor bay, set pinion to spur gear mesh precisely, and secure using the chassis motor screws. Initial testing should be performed at the lower voltage limit with close monitoring of motor temperature to validate gearing and ESC configuration.

From a tuning perspective, the MOT0427 increases torque for improved launch and corner exit control. Operators should evaluate pinion size and ESC parameters to balance torque, RPM, and thermal performance within the 4.8v-8.4v operating range.

What mechanical checks are recommended after fitting?

Verify motor mounting torque, confirm correct gear mesh with minimal backlash, and inspect pinion seating to avoid movement under load.

How should ESC and gearing be tuned for this motor?

Start with stock gearing and conservative ESC settings, monitor amp draw and temperature, then adjust pinion size or timing to control RPM and heat while optimising acceleration.

What service intervals are advisable?

Inspect brushes and bearings after the initial break-in and periodically thereafter based on running hours; frequent high-load operation shortens service intervals.