TAMIYA XV-02 PRO Centre Differential 70T M0.6 Replacement XV21070T by GPM  [XV21070T]

TAMIYA XV-02 Medium Carbon Steel High Speed M0.6 Module Center Differential Gear 70T - GPM XV23570TS
Price:
USD$17.90
Brand:
GPM
Model:
XV21070T
GTIN:
4894538379921
Condition:
Brand New
Write a review
alt="TAMIYA XV-02 Medium Carbon Steel High Speed M0.6 Module Center Differential Gear 70T - GPM XV23570TS" title="TAMIYA XV-02 Medium Carbon Steel High Speed M0.6 Module Center Differential Gear 70T - GPM XV23570TS"
alt="TAMIYA XV-02 Medium Carbon Steel High Speed M0.6 Module Center Differential Gear 70T - GPM XV23570TS" title="TAMIYA XV-02 Medium Carbon Steel High Speed M0.6 Module Center Differential Gear 70T - GPM XV23570TS"
alt="TAMIYA XV-02 Medium Carbon Steel High Speed M0.6 Module Center Differential Gear 70T - GPM XV23570TS" title="TAMIYA XV-02 Medium Carbon Steel High Speed M0.6 Module Center Differential Gear 70T - GPM XV23570TS"
alt="TAMIYA XV-02 Medium Carbon Steel High Speed M0.6 Module Center Differential Gear 70T - GPM XV23570TS" title="TAMIYA XV-02 Medium Carbon Steel High Speed M0.6 Module Center Differential Gear 70T - GPM XV23570TS"

Precision centre diff gear for XV-02 PRO

Engineered as a single 70-tooth M0.6 centre differential gear for the TAMIYA XV-02 PRO 1/10 4WD chassis, this part is intended for service and upgrade of the centre drive assembly.

Fabricated from medium carbon steel and finished for consistent tooth engagement, the gear focuses on improved wear resistance and predictable mesh under load. Proper installation requires the differential housing and related mating parts; use in conjunction with item #22049 (differential housing, connecting cup, and small bevel gear) to achieve stable centre power distribution.

Packing includes

  • Center diff gear 70T - 1pcs

Original Name / Part No:

22050

Compatible Models

  • TAMIYA-1/10 4WD XV-02 PRO CHASSIS-58707

Recommended for precision maintenance or upgrades of the XV-02 centre differential to preserve M0.6 tooth geometry and extend drivetrain life when paired with the specified housing components.

What tolerances are critical during assembly?

Ensure correct axial seating and minimal lateral play in the housing, and set gear mesh so teeth fully engage without binding for reliable performance.

Can this gear be used in a high-power setup?

The medium carbon steel construction offers improved wear resistance, but assess drivetrain loads and supporting components; upgrade other diff parts if higher torque is expected.

Do you recommend replacing bearings at the same time?

Inspect bearing condition during service; worn bearings can alter mesh and accelerate gear wear, so replace bearings as required for optimal alignment.

Is this part measured to OEM dimensions?

The gear is produced to match the M0.6 70T specification for the XV-02 PRO centre differential. Verify fit with your housing and mating components during assembly.