TAMIYA XV-02 PRO 70T M0.6 CNC-Ready Spur Gear XV2070TS by GPM  [XV2070TS]

TAMIYA XV-02 Medium Carbon Steel High Speed M0.6 Module Spur Gear 70T - GPM XV2070TS
Price:
USD$17.90
Brand:
GPM
Model:
XV2070TS
GTIN:
4894538379914
Condition:
Brand New
Write a review
alt="TAMIYA XV-02 Medium Carbon Steel High Speed M0.6 Module Spur Gear 70T - GPM XV2070TS" title="TAMIYA XV-02 Medium Carbon Steel High Speed M0.6 Module Spur Gear 70T - GPM XV2070TS"
alt="TAMIYA XV-02 Medium Carbon Steel High Speed M0.6 Module Spur Gear 70T - GPM XV2070TS" title="TAMIYA XV-02 Medium Carbon Steel High Speed M0.6 Module Spur Gear 70T - GPM XV2070TS"
alt="TAMIYA XV-02 Medium Carbon Steel High Speed M0.6 Module Spur Gear 70T - GPM XV2070TS" title="TAMIYA XV-02 Medium Carbon Steel High Speed M0.6 Module Spur Gear 70T - GPM XV2070TS"
alt="TAMIYA XV-02 Medium Carbon Steel High Speed M0.6 Module Spur Gear 70T - GPM XV2070TS" title="TAMIYA XV-02 Medium Carbon Steel High Speed M0.6 Module Spur Gear 70T - GPM XV2070TS"
alt="TAMIYA XV-02 Medium Carbon Steel High Speed M0.6 Module Spur Gear 70T - GPM XV2070TS" title="TAMIYA XV-02 Medium Carbon Steel High Speed M0.6 Module Spur Gear 70T - GPM XV2070TS"

70T M0.6 spur gear for XV-02 PRO - precision replacement

This spur gear is produced as a direct replacement for the TAMIYA XV-02 PRO 1/10 4WD chassis. The M0.6 module and 70-tooth profile are maintained to match XV-02 drivetrain geometry, supplied as a single unit for straightforward gearbox installation.

Fabricated from medium carbon steel, the component is intended to offer improved wear resistance and dimensional stability under repeated high-load cycles. Verify gear mesh and check for runout during assembly to protect the pinion, bearings, and gearbox alignment.

Assembly guidelines: confirm correct backlash with the chosen M0.6 pinion, inspect and service gearbox bearings and shims before tightening, and hand-rotate the drivetrain after fitting to validate smooth engagement. This part supports final ratio adjustment and extended service life in demanding setups.

Packing includes

  • M0.6 module spur gear 70T - 1pcs

Original Name / Part No:

51694

Compatible Models

  • TAMIYA-1/10 4WD XV-02 PRO CHASSIS-58707

Use the XV2070TS medium carbon steel 70T spur for a precision, direct-fit upgrade to XV-02 drivetrains where long-term durability and stable meshing are required.

Is the tooth geometry identical to the original XV-02 spur?

The gear uses the M0.6 module and 70-tooth profile to align with standard XV-02 gear geometry; confirm mesh on assembly to validate alignment.

What inspection steps are recommended after installation?

After fitting, check backlash, inspect bearings and shims for wear, and rotate the drivetrain by hand to detect any binding or uneven engagement.

Which pinion specifications match this spur?

Use an M0.6 module pinion to match tooth spacing; select tooth count based on desired final drive ratio while ensuring motor and ESC compatibility.