TAMIYA T3-01 DANCING RIDER Rear anti-rattle screw upgrade kit T3050R/SM by GPM  [T3050R/SM]

Rear wheel anti-rattle screw set

This stainless steel rear wheel flat-head screw and washer set is an RC-scale replacement for the TAMIYA T3-01 DANCING RIDER rear wheel mounting hardware. The kit addresses wheel rattle and loose fitment found with some stock parts by increasing bearing surface and using corrosion-resistant stainless steel for longevity.

Contents include two stainless steel flat-head screws sized 2.5x14 and two stainless steel flanged washers. The flanged washers have a larger contact area at the wheel hole compared with the stock washers, which helps close gaps and stabilise the wheel under load.

Installation is straightforward: remove the original rear wheel mounting screws, fit the larger-surface washers onto the wheel hub, then secure with the 2.5x14 flat-head screws. Do not overtighten; tighten to firm seating to avoid deforming plastic wheel hubs. The parts are intended for hobby RC use only and are appropriate for both original wheels and GPM Racing optional wheels.