Tamiya DF-02 Front Lower Arm Precision Alloy DF2055 by GPM  [DF2055]

Tamiya DF-02 Alloy Front Lower Arm With Pins & 2.5mm E-clips & Delrin Collars & Screws - 1pr set - GPM DF2055
Price:
USD$23.90
Brand:
GPM
Model:
DF2055
GTIN:
4894538040180
Condition:
Brand New
Write a review

Precision alloy front lower arm for DF-02 chassis

This precision-engineered alloy front lower arm set is an aftermarket replacement for the Tamiya DF-02 chassis. The kit includes the arm plus the mounting hardware required for installation: pins, 2.5mm E-clips, Delrin collars and screws. The component is intended to replace the standard plastic lower arm where improved stiffness and consistent geometry are required.

Use this arm to reduce front suspension flex and improve repeatable mounting points. The alloy construction increases rigidity compared with factory plastic arms, and the supplied hardware is selected to match DF-02 mounting geometry so installation reuses the original anchor points.

Assembly guidance: the arm is manufactured for direct-fit application on DF-02 lower-arm layouts with matching geometry. During installation ensure correct alignment, secure pin retention and proper seating of the Delrin collars; fit the 2.5mm E-clips onto the supplied pins and confirm preload. Standard hobby hand tools are suitable for fitting and tuning.

Specifications

  • Item: Front lower arm set, 1 pr
  • Material: Alloy
  • Model Number: DF2055
  • Included: Pins, 2.5mm E-clips, Delrin collars, screws
  • Compatibility: Tamiya DF-02

Engineered for hobbyists seeking a durable, stiffer front suspension mounting for DF-02 models, this alloy lower arm set provides a direct aftermarket replacement with matching hardware for reliable fitment.

What checks ensure correct fitment?

Verify lower-arm pivot spacing matches the DF-02 mounting bosses, confirm pin diameter and clip seating, and check that arm travel is unobstructed before final tightening.

How does alloy stiffness affect setup choices?

Increased arm stiffness reduces chassis flex at the front, which can shift load to shocks and tyres; consider small adjustments to spring rates and damping to re-establish balance.

What inspection routine is recommended?

After initial runs inspect pin retention, E-clip integrity and the seating of Delrin collars. Check for thread condition on screws and signs of fatigue at mounting points.

Are spare parts available for the hardware items?

Individual hardware like pins, E-clips and collars are commonly available through hobby suppliers; keep spares on hand for quick trackside repairs.