Tamiya CC01 Precision Alloy Upper Arm Tie-Rod CC054/M3 by GPM  [CC054/M3]

Tamiya CC01 Alloy Upper Arm (Tie Rod Design With M3 Thread) -1pr - GPM CC054/M3
Price:
USD$5.90
Brand:
GPM
Model:
CC054/M3
GTIN:
4894538031256
Condition:
Brand New
Write a review
alt="Tamiya CC01 Alloy Upper Arm (Tie Rod Design With M3 Thread) -1pr - GPM CC054/M3" title="Tamiya CC01 Alloy Upper Arm (Tie Rod Design With M3 Thread) -1pr - GPM CC054/M3"
alt="Tamiya CC01 Alloy Upper Arm (Tie Rod Design With M3 Thread) -1pr - GPM CC054/M3" title="Tamiya CC01 Alloy Upper Arm (Tie Rod Design With M3 Thread) -1pr - GPM CC054/M3"
alt="Tamiya CC01 Alloy Upper Arm (Tie Rod Design With M3 Thread) -1pr - GPM CC054/M3" title="Tamiya CC01 Alloy Upper Arm (Tie Rod Design With M3 Thread) -1pr - GPM CC054/M3"
alt="Tamiya CC01 Alloy Upper Arm (Tie Rod Design With M3 Thread) -1pr - GPM CC054/M3" title="Tamiya CC01 Alloy Upper Arm (Tie Rod Design With M3 Thread) -1pr - GPM CC054/M3"
alt="Tamiya CC01 Alloy Upper Arm (Tie Rod Design With M3 Thread) -1pr - GPM CC054/M3" title="Tamiya CC01 Alloy Upper Arm (Tie Rod Design With M3 Thread) -1pr - GPM CC054/M3"
alt="Tamiya CC01 Alloy Upper Arm (Tie Rod Design With M3 Thread) -1pr - GPM CC054/M3" title="Tamiya CC01 Alloy Upper Arm (Tie Rod Design With M3 Thread) -1pr - GPM CC054/M3"

Precision alloy upper arm for CC01

This is an RC-scale alloy upper arm manufactured for the Tamiya CC01 platform and provided as a single pair in the vendor listing. The link adopts a tie-rod arrangement with M3 threaded connection points and offers an aluminium-type alloy alternative to the original plastic arms for performance-minded hobbyists.

In service it functions as the upper suspension and steering link on the CC-01 chassis, locating the hub carrier and contributing to camber and steering geometry. It is recommended to perform a direct comparison with the factory arm to confirm hole spacing and mounting orientation prior to final assembly.

Installation notes: the arm uses M3-threaded tie-rod ends, so retain or source compatible M3 hardware and verify full thread engagement. Tighten fixings to a controlled, firm setting and validate full steering and suspension travel after installation to ensure there is no binding with the servo, linkage hardware, or wheel hubs.

This item is compatible with

  • TAMIYA CC01

What measurements confirm correct fitment?

Confirm the centre-to-centre distance of mounting holes and the angular orientation of the arm against the original part. A trial fit without full torque will show whether hole spacing and orientation align correctly.

Which rod ends are compatible with the M3 points?

Use standard M3-compatible rod ends and M3 screws that match the thread form. Choose rod ends with the correct ball or clevis style to suit your steering and suspension geometry.

Maintenance and inspection guidance?

Regularly inspect the arms for wear at threaded interfaces and mounting holes, check for loosening after run sessions, and remove any sharp burrs or machining residue before use.