Tamiya CC01 Precision Alloy Rear Differential Case CC012 by GPM  [CC012]

Tamiya CC01 Alloy Rear Differential Case - 1set - GPM CC012
Price:
USD$80.90
Brand:
GPM
Model:
CC012
GTIN:
4894538030198
Condition:
Brand New
Write a review
alt="Tamiya CC01 Alloy Rear Differential Case - 1set - GPM CC012" title="Tamiya CC01 Alloy Rear Differential Case - 1set - GPM CC012"
alt="Tamiya CC01 Alloy Rear Differential Case - 1set - GPM CC012" title="Tamiya CC01 Alloy Rear Differential Case - 1set - GPM CC012"
alt="Tamiya CC01 Alloy Rear Differential Case - 1set - GPM CC012" title="Tamiya CC01 Alloy Rear Differential Case - 1set - GPM CC012"
alt="Tamiya CC01 Alloy Rear Differential Case - 1set - GPM CC012" title="Tamiya CC01 Alloy Rear Differential Case - 1set - GPM CC012"
alt="Tamiya CC01 Alloy Rear Differential Case - 1set - GPM CC012" title="Tamiya CC01 Alloy Rear Differential Case - 1set - GPM CC012"

Precision alloy differential case for CC01 applications

This CNC friendly alloy rear differential case is produced for the Tamiya CC01 platform and is supplied as model CC012. The unit replaces the original plastic rear diff housing with a machined metal alternative intended to secure the differential gears and maintain alignment under increased torque.

Manufactured to support tolerance stability and long term durability, the alloy construction helps reduce deformation compared with polymer housings and improves bearing support. Installation requires standard differential and axle disassembly and is targeted at enthusiasts who carry out drivetrain servicing and performance upgrades.

In tuning scenarios where drivetrain load is increased, this case provides a robust platform for sustained gear alignment; confirm bearing fit and gear backlash during trial assembly to ensure optimum operation.

Specifications

  • Item Alloy Rear Differential Case
  • Material Alloy
  • Model Number GPM CC012
  • Compatibility Tamiya CC01

The GPM CC012 rear differential case targets precision and durability for CC01 drivetrains, offering a solid upgrade path for hobbyists performing drivetrain enhancements.

This item is compatible with

  • TAMIYA CC01

What tolerances should I verify during fitting?

Check bearing bore concentricity, axle spacing and face runout; small deviation can affect gear mesh, so measure before final assembly.

Recommended installation practice for metal housings?

Use appropriate torque settings, confirm clean mating surfaces and consider medium strength threadlocker on metal-to-metal fasteners to prevent loosening under vibration.

Is any break-in required for gears after fitting?

After assembly, rotate the diff and perform light runs to settle components, then recheck mesh and bearing preload and adjust as needed for optimal performance.