Tamiya CC-01 Front Lower Suspension Arm CC055 technical upgrade by GPM  [CC055]

Tamiya CC-01 Alloy Front Lower Suspension Arm - 1pr - GPM CC055
Price:
USD$18.90
Brand:
GPM
Model:
CC055
GTIN:
4894538031478
Condition:
Brand New
Write a review
alt="Tamiya CC-01 Alloy Front Lower Suspension Arm - 1pr - GPM CC055" title="Tamiya CC-01 Alloy Front Lower Suspension Arm - 1pr - GPM CC055"
alt="Tamiya CC-01 Alloy Front Lower Suspension Arm - 1pr - GPM CC055" title="Tamiya CC-01 Alloy Front Lower Suspension Arm - 1pr - GPM CC055"
alt="Tamiya CC-01 Alloy Front Lower Suspension Arm - 1pr - GPM CC055" title="Tamiya CC-01 Alloy Front Lower Suspension Arm - 1pr - GPM CC055"
alt="Tamiya CC-01 Alloy Front Lower Suspension Arm - 1pr - GPM CC055" title="Tamiya CC-01 Alloy Front Lower Suspension Arm - 1pr - GPM CC055"
alt="Tamiya CC-01 Alloy Front Lower Suspension Arm - 1pr - GPM CC055" title="Tamiya CC-01 Alloy Front Lower Suspension Arm - 1pr - GPM CC055"

Engineered alloy front lower arm for Tamiya CC-01 applications

The CC055 is supplied as an alloy front lower suspension arm in 1pr configuration for the Tamiya CC-01 scale chassis. This aftermarket component replaces the factory plastic lower arms on compatible CC-01 variants, providing a metal option focused on stronger pivot points and consistent fitment over repeated use.

The arm defines wheel hub location and directly affects camber and caster dynamics under load, which has a measurable effect on steering feedback. The alloy construction improves wear resistance at hinge points and offers a firmer mounting surface compared with stock plastic arms, assisting precise front-end tuning work.

Recommended installation procedure: remove the wheel and front linkages, compare the CC055 to the original arm to confirm pin spacing and mounting alignment, then transfer compatible hardware where applicable. Cycle the suspension fully to inspect for interference and confirm alignment settings after final assembly.

Specifications

  • Item: Alloy front lower suspension arm (1pr)
  • Material: Alloy
  • Model Number: CC055
  • Compatibility: Tamiya CC-01

The CC055 is aimed at builders seeking a durable metal alternative for CC-01 front lower arms to stabilise pivot behaviour and support more consistent suspension tuning.

This item is compatible with

  • TAMIYA CC01

What does the "1pr" notation indicate?

"1pr" refers to one pair, meaning two arms are included to service both left and right front positions.

How should I verify fitment before tightening?

Align the replacement arm to the stock unit, confirm pin spacing and mount orientation, then check full suspension travel for binding before final torque.

Will I need to change other suspension parts?

In most cases existing pins and bushings can be reused if they match; replace hardware only if there is play or interference.

What maintenance is recommended for alloy arms?

Inspect pivots and fasteners periodically, clean any grit from moving parts, and confirm alignment after heavy running to maintain performance.