Tamiya CC01 70mm Rear Ball Top Damper CC070NR by GPM  [CC070NR]

Tamiya CC01 Nylon Rear Ball Top Damper (70mm) With Alloy Body & Ball Ends - 1pr set - GPM CC070NR
Price:
USD$16.90
Brand:
GPM
Model:
CC070NR
GTIN:
4894538031782
Condition:
Brand New
Write a review
alt="Tamiya CC01 Nylon Rear Ball Top Damper (70mm) With Alloy Body & Ball Ends - 1pr set - GPM CC070NR" title="Tamiya CC01 Nylon Rear Ball Top Damper (70mm) With Alloy Body & Ball Ends - 1pr set - GPM CC070NR"
alt="Tamiya CC01 Nylon Rear Ball Top Damper (70mm) With Alloy Body & Ball Ends - 1pr set - GPM CC070NR" title="Tamiya CC01 Nylon Rear Ball Top Damper (70mm) With Alloy Body & Ball Ends - 1pr set - GPM CC070NR"
alt="Tamiya CC01 Nylon Rear Ball Top Damper (70mm) With Alloy Body & Ball Ends - 1pr set - GPM CC070NR" title="Tamiya CC01 Nylon Rear Ball Top Damper (70mm) With Alloy Body & Ball Ends - 1pr set - GPM CC070NR"
alt="Tamiya CC01 Nylon Rear Ball Top Damper (70mm) With Alloy Body & Ball Ends - 1pr set - GPM CC070NR" title="Tamiya CC01 Nylon Rear Ball Top Damper (70mm) With Alloy Body & Ball Ends - 1pr set - GPM CC070NR"

Rear ball-top damper for CC01

This 70mm rear ball top damper is supplied as a direct-fit aftermarket replacement for the Tamiya CC01 scale chassis. The design pairs a nylon damper body with an alloy-bodied post and alloy ball ends, delivered as a single pair for the rear mounting positions.

The component is intended to replace the OEM rear ball-top fittings while retaining original mounting geometry. The material pairing provides hard-wearing contact surfaces at the ball ends together with a resilient nylon body to tolerate routine running stresses and light impacts.

Installation notes: the unit installs into the standard CC01 ball-top attachment points in the same orientation as the original parts. Inspect existing linkage hardware and ball studs for wear prior to installation, and confirm smooth articulation through the suspension travel after fitting. The damper serves as the mechanical pivot for rear suspension movement and contributes to consistent rear behaviour during setup adjustments.

Specifications

  • Item Tamiya CC01 Nylon Rear Ball Top Damper (70mm) with Alloy Body & Ball Ends, 1pr set
  • Material Nylon body, alloy post and alloy ball ends
  • Model Number CC070NR
  • Compatibility Tamiya CC01

A focused aftermarket rear ball-top replacement that maintains CC01 geometry while providing durable pivot points for routine tuning and reliable rear articulation.

This item is compatible with

  • TAMIYA CC01

Will the CC070NR mount into stock CC01 rear sockets?

Yes, the CC070NR is produced to the same rear ball-top mounting pattern as the original CC01 parts for direct installation.

What are the wear points to monitor?

Monitor ball studs and the mating surfaces on the linkage for play; alloy ball ends are durable but studs can wear over time and affect articulation.

Is any modification needed for fitment?

No modification is required for standard CC01 rear mounts; install the pair in the original orientation and verify clearance through the full suspension travel.

How does the mixed material construction benefit durability?

Nylon body sections help resist impact and abrasion on the damper tube, while alloy posts and ball ends provide harder wearing contact points where the linkage pivots, helping to extend service intervals.