SCX24 Brass Hex Adapter Set SCX2410X/3.5 by GPM  [SCX2410X/3.5]

AXIAL 4WD SCX24 DEADBOLT Brass Hex Adapters 3.5mm Thick - 8pc set - GPM SCX2410X/3.5
Price:
USD$8.90
Brand:
GPM
Model:
SCX2410X/3.5
GTIN:
4894538349498
Condition:
Brand New
Write a review
alt="AXIAL 4WD SCX24 DEADBOLT Brass Hex Adapters 3.5mm Thick - 8pc set - GPM SCX2410X/3.5" title="AXIAL 4WD SCX24 DEADBOLT Brass Hex Adapters 3.5mm Thick - 8pc set - GPM SCX2410X/3.5"
alt="AXIAL 4WD SCX24 DEADBOLT Brass Hex Adapters 3.5mm Thick - 8pc set - GPM SCX2410X/3.5" title="AXIAL 4WD SCX24 DEADBOLT Brass Hex Adapters 3.5mm Thick - 8pc set - GPM SCX2410X/3.5"
alt="AXIAL 4WD SCX24 DEADBOLT Brass Hex Adapters 3.5mm Thick - 8pc set - GPM SCX2410X/3.5" title="AXIAL 4WD SCX24 DEADBOLT Brass Hex Adapters 3.5mm Thick - 8pc set - GPM SCX2410X/3.5"
alt="AXIAL 4WD SCX24 DEADBOLT Brass Hex Adapters 3.5mm Thick - 8pc set - GPM SCX2410X/3.5" title="AXIAL 4WD SCX24 DEADBOLT Brass Hex Adapters 3.5mm Thick - 8pc set - GPM SCX2410X/3.5"

Precision brass hexs engineered for 1/24 wheel hubs

This 8pcs set is engineered for AXIAL 1/24 models and delivers CNC-friendly brass hex adapters for accurate wheel mounting and hub connection. The brass components maintain a 3.5mm wall thickness and include 1.5x5 steel pins to ensure positive retention and repeatable installation. Each adapter contributes approximately 1g of additional mass to the wheel assembly, useful when fine-tuning unsprung weight at this scale.

These adapters locate at the wheel hex position to couple the wheel to the front CVD or the rear drive shaft, replacing standard plastic hexs when a metal interface is required for improved wear resistance and consistent alignment. Installation requires seating the adapter squarely and installing the 1.5x5 steel pins; verify pin alignment and hub clearance during assembly to avoid binding and to preserve drivetrain geometry.

Recommended for applications needing a compact, high-precision brass replacement hex for SCX24 DEADBOLT or compatible 1/24 Jeep Wrangler JLU CRC platforms where tighter hub tolerances or predictable unsprung mass are priorities.

Packing includes

  • Hex Adpater - 4pcs
  • 1.5*5 Steel Pin - 4pcs

Original Name / Part No:

AXI31610,AXI31609

Compatible Models

  • AXIAL-1/24 4WD SCX24 DEADBOLT-AXI90081
  • AXIAL-1/24 JEEP WRANGLER JLU CRC-AXI00002

What are the precise contents of the kit?

Four brass hex adapters and four 1.5x5 steel retention pins are supplied to service two wheels per kit side.

How should I verify correct fitment?

Confirm hub pocket dimensions and hex pocket depth, seat the adapter squarely, fit the 1.5x5 pins and rotate the wheel to check for any interference before final use.

What are the expected handling effects?

Each adapter adds about 1g at the wheel centre, offering a small but repeatable change to unsprung mass and steering feel useful for scale tuning.