Precision TRX-4 Door Handle Upgrade 16pc TRX4ZSP10 by GPM  [TRX4ZSP10]

TRAXXAS TRX4 TRAIL CRAWLER Door Handle For TRX-4 - 16pc set - GPM TRX4ZSP10
Price:
USD$9.90
Brand:
GPM
Model:
TRX4ZSP10
Condition:
Brand New
Write a review
alt="TRAXXAS TRX4 TRAIL CRAWLER Door Handle For TRX-4 - 16pc set - GPM TRX4ZSP10" title="TRAXXAS TRX4 TRAIL CRAWLER Door Handle For TRX-4 - 16pc set - GPM TRX4ZSP10"
alt="TRAXXAS TRX4 TRAIL CRAWLER Door Handle For TRX-4 - 16pc set - GPM TRX4ZSP10" title="TRAXXAS TRX4 TRAIL CRAWLER Door Handle For TRX-4 - 16pc set - GPM TRX4ZSP10"
alt="TRAXXAS TRX4 TRAIL CRAWLER Door Handle For TRX-4 - 16pc set - GPM TRX4ZSP10" title="TRAXXAS TRX4 TRAIL CRAWLER Door Handle For TRX-4 - 16pc set - GPM TRX4ZSP10"
alt="TRAXXAS TRX4 TRAIL CRAWLER Door Handle For TRX-4 - 16pc set - GPM TRX4ZSP10" title="TRAXXAS TRX4 TRAIL CRAWLER Door Handle For TRX-4 - 16pc set - GPM TRX4ZSP10"

Technical overview of TRX-4 door handles

This 16-piece handle set is intended for TRX-4 pattern model shells and is referenced as TRX4ZSP10. Components are produced by PLA 3D printing to achieve consistent surface detail and scale-accurate geometry for crawler modelling.

Fasteners supplied: twelve M1.2x3 stainless steel screws to attach the handles to thin plastic shells. Screw sizing and count are selected to match the printed parts for model-shell applications.

Assembly procedure: prepare pilot holes with a reamer or fine drill bit to the recommended diameter for M1.2 screws, align each handle, and torque screws lightly to secure. Monitor hole size and torque to avoid stress concentration and shell failure.

Application note: these parts are cosmetic scale components for TRX-4 style bodies and are not engineered for load-bearing or real vehicle use.

Compatible Models

  • TRX 4

What material and print method are used?

Parts are 3D printed in PLA to provide repeatable surface quality and dimensional stability for scale detailing.

Recommended pilot hole size for M1.2x3 screws?

A small pilot hole slightly smaller than the screw minor diameter is advised; test on scrap shell material to confirm the correct diameter for your plastic.

Are replacement screws available?

M1.2x3 stainless screws are a common hobby fastener and can be sourced from model shops or hardware suppliers if needed.