Precision Chassis Protection Set XRTZSP1A XRTZSP1 for TRAXXAS XRT 8S by GPM  [XRTZSP1A]

Chassis protection for TRAXXAS XRT 8S

This is an RC-scale chassis protection plate set by GPM for the TRAXXAS XRT 8S platform, engineered to reinforce the front, centre and rear underside of the model. Each plate is produced from 304 stainless steel to provide corrosion resistance and abrasion protection where the original chassis sees frequent contact or wear.

The set is finished with hand polishing and quality checks at each stage, delivering flat mating faces for a tight fit to the stock chassis. Installation is non-destructive and intended to reuse the vehicle's original mounting points, secured with the supplied fasteners. The kit is supplied to be fitted directly to the stock chassis and fastened with the recommended reinforcing screws.

In practical RC tuning terms this plate set serves to protect vulnerable underside areas during trail or off-road runs, reduce chassis edge wear from impacts, and help maintain chassis flatness under repeated stress. It does not alter suspension geometry or drivetrain settings and is intended strictly as a protective and structural reinforcement part for the scale model.

Fit the plates to protect and stiffen the XRT 8S chassis without modifying stock layout, then check fastener torque periodically after initial runs.