Precision center differential output gears FR1200S/G2 for TRAXXAS #6780 by GPM  [FR1200S/G2]

TRAXXAS HOSS 4X4 VXL Medium Carbon Steel Output Gears For The #6780 Center Differential - GPM FR1200S/G2
Price:
USD$26.90
Brand:
GPM
Model:
FR1200S/G2
Condition:
Brand New
Write a review
alt="TRAXXAS HOSS 4X4 VXL Medium Carbon Steel Output Gears For The #6780 Center Differential - GPM FR1200S/G2" title="TRAXXAS HOSS 4X4 VXL Medium Carbon Steel Output Gears For The #6780 Center Differential - GPM FR1200S/G2"

Replacement output gears for #6780 center differential

The FR1200S/G2 gear pair supplies direct replacement output gears for the #6780 center differential used on a range of TRAXXAS 1/10 4WD platforms. Manufactured from medium carbon steel, the components are intended to support routine maintenance and rebuilds where a metal gear is preferred for durability and consistent engagement.

Each package contains two identical output gears sold as a pair for use during differential servicing or when adjusting gear mesh. These items are designed specifically as scale RC drivetrain components and must not be used in full-size vehicle applications.

Packing includes

  • Differential output gears - 2pcs

Original Name / Part No:

Part Location:Differential Gear

Compatible Models

  • TRAXXAS-1/10 4WD FORD F-150 RAPTOR R TRUCK-101076-4
  • TRAXXAS-1/10 4WD HOSS 4X4 VXL 3S-90076-4
  • TRAXXAS-1/10 RUSTLER 4X4 VXL-67076-4
  • TRAXXAS-1/10 Stampede 4X4 Brushless -67154-4
  • TRAXXAS-1/10 Rustler 4X4 Brushless -67164-4
  • TRAXXAS-1/10 Rustler 4X4 -67064-1
  • TRAXXAS-1/10 Rustler 4X4 -67064-61
  • TRAXXAS-1/10 Slash 4X4 Ultimate -68077-4
  • TRAXXAS-1/10 Slash 4X4 VXL -68086-4
  • TRAXXAS-1/10 Slash 4X4 -68054-1
  • TRAXXAS-1/10 Slash 4X4 -68054-61
  • TRAXXAS-1/10 Slash 4X4 Brushless -68154-4
  • TRAXXAS-1/10 Slash 4X4 Ultimate -68277-4
  • TRAXXAS-1/10 Slash 4X4 VXL -68286-4
  • TRAXXAS-1/10 Stampede 4X4 VXL -67086-4

Install these medium carbon steel output gears during center differential rebuilds or when replacing worn parts; verify correct fit with the #6780 center differential and adjust mesh as required for optimal engagement.

What checks should I perform before fitting these gears?

Confirm the vehicle uses the #6780 center differential, inspect mating surfaces and bearings for wear, and set proper gear mesh prior to final assembly.

Are any modifications needed to use these gears?

No modifications should be necessary when the gears are installed in compatible differentials, but minor mesh adjustment and verification are recommended for quiet operation.

What inspection routine is suggested after installation?

Run the drivetrain lightly to seat the gears, then recheck mesh and clearances and inspect for abnormal wear or noise during the first few service intervals.

Do these gears require a specific lubricant?

Use a compatible gear grease suitable for metal-on-metal contact and apply conservatively to the gear teeth to reduce wear and operating noise.