Precision alloy competition upgrade TEC2VXLKIT by GPM  [TEC2VXLKIT]

TRAXXAS 4WD GT4 TEC 3.0 VXL Complete Competition set - GPM TEC2VXLKIT
Price:
USD$446.00
Brand:
GPM
Model:
TEC2VXLKIT
Please kindly input your name and email address, we will inform you once we have the restocking.
Write a review
alt="TRAXXAS 4WD GT4 TEC 3.0 VXL Complete Competition set - GPM TEC2VXLKIT" title="TRAXXAS 4WD GT4 TEC 3.0 VXL Complete Competition set - GPM TEC2VXLKIT"
alt="TRAXXAS 4WD GT4 TEC 3.0 VXL Complete Competition set - GPM TEC2VXLKIT" title="TRAXXAS 4WD GT4 TEC 3.0 VXL Complete Competition set - GPM TEC2VXLKIT"
alt="TRAXXAS 4WD GT4 TEC 3.0 VXL Complete Competition set - GPM TEC2VXLKIT" title="TRAXXAS 4WD GT4 TEC 3.0 VXL Complete Competition set - GPM TEC2VXLKIT"
alt="TRAXXAS 4WD GT4 TEC 3.0 VXL Complete Competition set - GPM TEC2VXLKIT" title="TRAXXAS 4WD GT4 TEC 3.0 VXL Complete Competition set - GPM TEC2VXLKIT"

Precision alloy competition upgrade for TRAXXAS 4-TEC

This TEC2VXLKIT is an engineered aftermarket package for TRAXXAS 1/10 4WD GT4 and 4-TEC on-road chassis, consolidating CNC-style alloy differential housings, machined aluminium suspension mounts, hardened CVDs and high speed cooling fans to increase structural stiffness and thermal management for race use.

Components are intended for TRAXXAS 4-TEC 2.0 and 3.0 based platforms and serve as tuning and durability improvements rather than modifying basic suspension geometry. Installation requires removal of stock drivetrain and suspension parts; verify fitment and clearances and use standard RC tooling for accurate assembly.

Packing includes

  • 7075 Alloy Front Differential Housing - 1pcs
  • Alloy 7075 Rear Differential Housing - 1pcs
  • Aluminum 7075 Motor Mount Plate With Heat Sink Fins - 1pcs
  • Aluminum Front C Hubs - 1pcs
  • Aluminum Front Knuckle Arm - 1pcs
  • Aluminum Rear Knuckle Arm - 1pcs
  • 7075 Alloy Servo Mount - 1pcs
  • Aluminum Front Shock Towers - 1pcs
  • Aluminum Rear Shock Towers - 1pcs
  • Aluminum Steering Assembly - 1pcs
  • Aluminum Front Suspension Arms - 1pcs
  • Aluminum Rear Suspension Arms - 1pcs
  • 6061 Alloy Front (58mm)+Rear (60mm) Oil Filled Ultra Shocks - 1pcs
  • Aluminum Servo Saver With Aluminum Steering Link - 1pcs
  • #45 Harden Steel Rear CVD - 1pcs
  • #45 Harden Steel Front CVD - 1pcs
  • 4140 Carbon Steel + 7075 Alloy Front & Rear Complete Differential - 1pcs
  • 6061-T6 Alloy High Speed Cooling Fan 18000 RPM Compatible With 36mm Motor - 1pcs
  • 6061-T6 Alloy ESC High Speed Cooling Fan 20000 RPM (BL-2S: 3383 And Velineon VXL-3S: 3355R) - 1pcs

Compatible Models

  • TRAXXAS 1/10 4WD FORD GT 4-TEC 2.0-83056-4
  • TRAXXAS 1/10 4-TEC 3.0 CORVETTE STINGARY-93054-4
  • TRAXXAS 1/10 4-Tec 3.0 Toyota Supra BL-2s-93164-4
  • TRAXXAS 1/10 4-Tec 2.0 BL-2s Chassis On-Road Cars-83124-4
  • TRAXXAS 1/10 4-Tec 2.0 VXL Chassis On-Road Cars-83076-4

For precision-focused builders and club competitors, the TEC2VXLKIT groups machined alloy components and dedicated cooling to reduce flex and thermal drift, simplifying a track-grade upgrade path.

What machining tolerances should I expect from the alloy parts?

Components are specified as precision alloy parts intended to offer tighter mounting tolerances than stock plastic, but verify individual part mating points and run a trial assembly to confirm alignment.

Are the supplied CVDs compatible with standard 4-TEC splines?

The kit lists #45 hardened steel CVDs designed as direct replacements for common 4-TEC drive interfaces; confirm spline count and length during mock installation to avoid surprises.

What cooling performance gains are realistic with the included fans?

High speed 6061-T6 alloy fans improve airflow over motor and ESC assemblies; actual temperature reductions depend on airflow path, mounting and ambient conditions so measure temperatures after installation.

Should I change differential oil when fitting the new diffs?

Inspect and set diff oil to your preferred spec when assembling the 4140/7075 differentials to tune traction and centre bias for track conditions.

What basic tools and supplies are recommended?

A full set of hex drivers, screwdrivers, pliers and threadlocker are recommended; keep spare fasteners and measure torque settings to prevent distortion of machined mounts.