MP7508F Precision 4mm Front Lower Arm Lock Plate for Kyosho MP7.5 by GPM  [MP7508F]

Kyosho Inferno MP 7.5 Option Alloy Lower Arm Lock Plate For Front Gear Box (4mm Thick) - 1pc - GPM MP7508F
Price:
USD$4.80
Brand:
GPM
Model:
MP7508F
Please kindly input your name and email address, we will inform you once we have the restocking.
Write a review

Precision alloy lower arm lock plate for Kyosho MP7.5 front box

This aftermarket 4mm alloy lower arm lock plate is supplied as 1pc and is made to fit the Kyosho Inferno MP 7.5 front gearbox assembly. The thicker alloy plate is intended as a direct replacement for the standard lower arm lock plate to reduce flex at the mounting interface and provide a firmer connection between the lower arm and the gearbox housing.

Installation follows standard MP7.5 service procedures: remove the original lower arm lock plate, align the alloy component to the factory mounting points, and secure with the original fasteners. After installation, verify alignment and full suspension travel to ensure no mechanical interference.

As a tuning component the plate improves lower arm pivot stability under load, helping to deliver more consistent steering response on high-traction surfaces and during demanding cornering. This unit is provided for setup optimisation and improved durability on the Kyosho Inferno MP 7.5 front assembly.

Does MP7508F fit the stock MP7.5 front gearbox without modification?

Yes. MP7508F is designed as a direct-fit aftermarket replacement for the Kyosho Inferno MP 7.5 front lower arm lock plate. Confirm hole alignment before final assembly.

What engineering benefit does the 4mm alloy provide?

The increased 4mm thickness reduces flex at the lower arm mounting point, improving pivot stiffness and offering a firmer connection that supports consistent steering geometry under load.

Are replacement fasteners required for fitting?

No special fasteners are required; the plate is intended to be secured with the existing screws from your kit. If the original hardware is worn, use matching fasteners to maintain correct clamp and alignment.