Mini-Z Overland Alloy Rim Upgrade MOL0308K by GPM  [MOL0308K]

Technical rim description for Mini-Z Overland

The MOL0308K alloy rim is supplied as an aftermarket replacement for Kyosho Mini-Z Overland vehicles and is intended as a scale upgrade component. Confirm dimensional fitment against the vehicle hub prior to installation.

The product is delivered as a single pair and is identified by the 8h designation; verify hub engagement and tyre seating during test fitting. Standard Mini-Z Overland wheel removal and refit methods are applicable.

Assembly guidance: remove existing wheel units, inspect hub faces and spacer condition, fit the alloy rim onto the hub and secure with the original fasteners. Use a correctly sized hex driver and tighten progressively while monitoring axial and radial runout. Avoid excessive torque to prevent stress on wheel hexes or hub components.

Performance considerations: moving to an aluminium rim alters mass distribution and lateral stiffness at model scale, which can affect steering feedback and suspension response on the Mini-Z Overland chassis. Evaluate wheel balance and clearance and re-calibrate trim and steering endpoints after fitting.