Mini-z AWD Rear Wide Ridge Delrin Upgrade Rims (5p, 11mm, 1.0mm) DMZA501RW/+1.0 by GPM  [DMZA501RW/+1.0]

Mini-z AWD Delrin Rear Wide Ridge Rims (5p, 1.0mm Off set , Width 11mm) - 1pr - GPM DMZA501RW/+1.0
Price:
USD$6.80
Brand:
GPM
Model:
DMZA501RW/+1.0
Please kindly input your name and email address, we will inform you once we have the restocking.
Write a review

Delrin rear wide-ridge upgrade wheels for Mini-z AWD

High-accuracy Delrin rear rims supplied as a matched pair for Mini-z AWD MR-03 chassis. The wheels use a five-bolt mount, a 1.0mm lateral offset and an 11mm rim width to permit controlled rear track and clearance adjustments during setup.

Compatibility and inspection: intended for MR-03 AWD hub assemblies; measure hub spacers and wheel-to-body gaps before installation to ensure correct fit and avoid interference. The product is an aftermarket pair for model use only.

Installation and tuning procedure: replace rims sequentially, confirm radial and lateral runout, and evaluate the effect of the 1.0mm offset plus 11mm width on tyre placement and rear stance. Use these rims to refine lateral alignment without altering driveline geometry.

Engineered for consistent fitment and straightforward rear track tuning on Mini-z AWD platforms.

What specific hubs do these rims mate to?

They are designed for Mini-z AWD MR-03 style hub interfaces; confirm your hub flange and screw pattern match the rim before fitting.

How should I verify runout after fitting?

Mount the wheel, spin the assembly and observe lateral wobble at the tyre bead; small runout can be corrected with thin shims or by re-seating the wheel hardware.

Are any special fasteners required?

These use standard Mini-z 5-point mounting hardware; verify screw length and head clearance to prevent contact with the axle or bodywork.