Mini-Z AWD Rear Precision Delrin Rims 6p 0mm Offset 8.3mm DMZA601RW888 by GPM  [DMZA601RW888]

Mini-z AWD Delrin Rear Wide Ridge Rims (6p, 0mm Off set , Width 8.3mm) With Tires - 1pr set - GPM DMZA601RW888
Price:
USD$4.80
Brand:
GPM
Model:
DMZA601RW888
Please kindly input your name and email address, we will inform you once we have the restocking.
Write a review

Technical overview of Delrin rear rims for Mini-Z AWD

This pair of Delrin wheels with tyres is intended for Mini-Z AWD chassis and is listed as model DMZA601RW888. The rims are injection molded Delrin, specified as 6p with 0mm offset and an 8.3mm width, supplied pre-mounted to simplify setup for indoor running.

Fitment notes: confirm rear hex and hub type on the target Mini-Z AWD vehicle before fitting. Replace the factory rear wheels with this set using the existing wheel retaining hardware and verify concentricity and runout after installation. The 0mm offset and 8.3mm flange width should be checked against bodyshell clearance and suspension link geometry on MR-03 AWD style cars.

Performance and tuning: these wider rear rims modify tyre profile and contact patch to alter rear traction characteristics for carpet or indoor tracks. The Delrin material provides dimensional stability for repeatable tyre fitment and balancing; adjust tyre compound and inner support to achieve the desired rear grip and handling balance.

What measurements should I verify before fitting?

Measure the rear hub hex size and confirm the MR-03 AWD hub accepts a 6p profile rim. Also check body and suspension clearances for an 8.3mm wide tyre and confirm the 0mm offset suits your chassis setup.

How should I inspect wheel runout and balance?

Spin the fitted wheel on the hub and observe lateral and radial runout. Use light trimming or balancing tape as required to reduce vibration; Delrin rims generally hold tolerances well for predictable balancing.

Recommended tyre handling after swapping?

After changing tyres, verify seating and rebalance the assembly. Choose compounds and inserts based on track surface and desired rear grip, and retest handling in controlled runs.