Mini-Z AWD Rear Delrin Precision Rims 11mm Width 1.5mm Offset DMZA501RW/+1.5 by GPM  [DMZA501RW/+1.5]

Mini-z AWD Delrin Rear Wide Ridge Rims (5p, 1.5mm Off set , Width 11mm) - 1pr - GPM DMZA501RW/+1.5
Price:
USD$6.80
Brand:
GPM
Model:
DMZA501RW/+1.5
Please kindly input your name and email address, we will inform you once we have the restocking.
Write a review

Rear Delrin Rims for Mini-Z AWD Platforms

This Delrin rear rim set is specified for KYOSHO Mini-Z AWD cars and is referenced by part code DMZA501RW/+1.5. The item is sized with a 1.5mm offset and an 11mm rim width, using Delrin material intended for rear axle placement on Mini-Z AWD models.

Functionally these rims provide a measured change to rear track and tyre seating geometry. The stated offset and width adjust how the tyre contacts the surface relative to stock wheels, which is useful for setup work when matching tyre profile, body clearance or handling balance. Verify rim dimensions against tyre and hub specifications before use.

Wheel replacement follows standard Mini-Z procedures. Reuse the original wheel hardware and confirm hub/hex compatibility prior to final fitment. Delrin offers a durable, low-friction interface for scale rims; inspect for wheel runout and ensure secure fastening before track use.

What exact dimensions should I check for hub fit?

Measure hex width and hub inner diameter to confirm the rim seats correctly; compare those dimensions to MR-03 AWD or equivalent hubs before assembly.

Does Delrin affect tyre adhesion?

Delrin provides a consistent, low-friction bead seat which can change how a tyre conforms to the rim; expect small differences in mechanical grip depending on tyre compound and profile.

Recommended checks after installation?

After fitting, spin each wheel to check for lateral runout, confirm hardware torque, and re-inspect after an initial short run to ensure no loosening has occurred.