Mini-Z AWD Rear Alloy Upgrade Rims 18p 11mm 1.0mm offset MZA803RW/+1.0 by GPM  [MZA803RW/+1.0]

Mini-z AWD Alloy Rear Wide Sinkage Rims (18p, 1.0mm Off set , Width 11mm) - 1pr - GPM MZA803RW/+1.0
Price:
USD$6.80
Brand:
GPM
Model:
MZA803RW/+1.0
Please kindly input your name and email address, we will inform you once we have the restocking.
Write a review

GPM alloy rear rims for Mini-Z AWD tuning

This alloy rear rim set is supplied by GPM as model MZA803RW/+1.0 and is intended for Mini-Z AWD scale applications. The wheels follow an 18p designation with a 1.0mm offset and 11mm rim width, allowing measured changes to rear wheel fitment and seating depth on compatible Mini-Z AWD chassis.

The item is focused on RC-scale wheel positioning and tyre mounting. Sold as one pair, these rims are designed for hobbyists adjusting rear track width, tyre tuck or clearance on MR-03 AWD style Mini-Z AWD builds. Follow standard Mini-Z AWD mounting practice for reliable fitment.

Technical guidance: verify spline engagement and hub compatibility before final assembly, check bead seating on the 11mm rim, and perform dynamic balance checks after mounting. Use appropriate hardware and torque settings when installing these alloy hop-up rims.

Compatibility checklist for MR-03 AWD hubs

Confirm spline count and hub diameter match the rim bore, check for axle nut clearance, and trial fit with intended tyres prior to permanent fixing.

Recommended verification after fitting

Inspect radial and lateral runout, ensure tyre bead seating is uniform on the 11mm rim, and balance the assembly to reduce vibration at running speeds.

Offset and track considerations

A 1.0mm offset provides a small change in wheel centreline; assess resultant track width and clearance on your specific Mini-Z AWD chassis before trimming or shimming components.