Mini-Z AWD Precision Rear Wide Alloy Rims 11mm MZA803RW/0 by GPM  [MZA803RW/0]

Technical Overview of Mini-Z AWD Rear Wide Alloy Rims

This pair of CNC-style alloy rear rims is supplied as 1 pr (2 pcs) for Mini-Z AWD micro cars. The component is defined as a rear wide sinkage rim with 11mm width, 0mm offset and an 18p bolt pattern, intended to permit wider tyre profiles and to modify rear track geometry for tuning purposes.

Compatibility targets the Mini-Z AWD platform. These aluminium rims serve as an aftermarket upgrade to change rear track and tyre fitment; confirm hub bore and wheel hex interface on the target chassis prior to installation to ensure correct engagement and centring.

Installation and setup: remove original rear wheels and verify the wheel hex fully seats into the rim hub, then fasten using the appropriate 18p nuts or existing hardware. After fitting, inspect tyre seating and body clearance, then perform a controlled run to validate there is no interference. Wider rear rims will influence lateral grip and cornering balance, so re-evaluate rear spring rates and anti-roll settings when optimizing handling.