Mini Inferno 12T Titanium Motor Pinion TMIF012T by GPM  [TMIF012T]

Kyosho Mini Inferno Titanium Motor Gear (12T) - 1pc set - GPM TMIF012T
Price:
USD$2.70
Brand:
GPM
Model:
TMIF012T
GTIN:
4894538191813
Please kindly input your name and email address, we will inform you once we have the restocking.
Write a review
alt="Kyosho Mini Inferno Titanium Motor Gear (12T) - 1pc set - GPM TMIF012T" title="Kyosho Mini Inferno Titanium Motor Gear (12T) - 1pc set - GPM TMIF012T"

Technical pinion overview

This single 1 pcs replacement motor gear is intended for the Kyosho Mini Inferno platform and is a 12T motor pinion manufactured in titanium. The part is supplied as one unit and functions as a direct spare where a 12-tooth motor gear is required.

Use the pinion to replace a worn item or when validating small changes to the final drive ratio during tuning. Titanium is specified as the material; installers should verify shaft diameter and correct gear mesh before powered operation to avoid accelerated wear to adjacent components.

Fitting procedure: install the pinion on the motor shaft maintaining the original orientation, confirm axial alignment with the spur gear, and secure any set screw or retention device used by your motor. Manually rotate the drivetrain after installation to confirm smooth engagement and correct mesh ahead of powered testing.

What measurements determine compatibility?

Confirm motor shaft diameter, pinion bore, and tooth count; this item is a 12T pinion intended for Mini Inferno use and must match your motor interface.

Any run-in or break-in required?

After correct installation and mesh check, a light low-load run is advisable to confirm stable operation before full-throttle testing.

What is included with the pinion?

The supply is one single 12T motor pinion provided as a replacement part for Mini Inferno applications.