LOSI MINI-T 2.0 Rear Dog Bone Upgrade LM495S/SH by GPM  [LM495S/SH]

Technical Notes for Rear Dog Bone LM495S/SH

The LM495S/SH dog bone set is supplied as a 2pcs aftermarket replacement intended for the rear CVD area on TEAM LOSI MINI-T 2.0 2WD cars. The parts are intended to transfer rotational torque from the gearbox to the rear wheel hexes at the rear dog bone position.

Manufactured from hardened steel #45, these dog bones deliver enhanced wear resistance compared with common stamped or softer alloy parts, supporting sustained wheel rotation under hobby and light competition conditions. The shaft diameter increase from 2.1mm to 2.9mm raises torsional stiffness and lowers the risk of bending or accelerated joint wear under load.

During installation, fit as direct rear replacements into the existing CVD/dog bone hubs and check clearance with the driveshaft housings and wheel hexes. Note that increased diameter can affect fit where aftermarket hubs or spacers are present; verify alignment and perform a dynamic test spin after assembly. This component is designed to replace the OEM rear dog bone and to provide a more rigid rear drivetrain connection.