LOSI MINI-T 2.0 Centre Precision 59T Spur LM059TS by GPM  [LM059TS]

TEAM LOSI MINI-T 2.0 2WD Harden Steel #45 Spur Gear 59T - 1pc set - GPM LM059TS
Price:
USD$14.90
Brand:
GPM
Model:
LM059TS
GTIN:
4894538350579
Condition:
Brand New
Write a review
alt="TEAM LOSI MINI-T 2.0 2WD Harden Steel #45 Spur Gear 59T - 1pc set - GPM LM059TS" title="TEAM LOSI MINI-T 2.0 2WD Harden Steel #45 Spur Gear 59T - 1pc set - GPM LM059TS"
alt="TEAM LOSI MINI-T 2.0 2WD Harden Steel #45 Spur Gear 59T - 1pc set - GPM LM059TS" title="TEAM LOSI MINI-T 2.0 2WD Harden Steel #45 Spur Gear 59T - 1pc set - GPM LM059TS"
alt="TEAM LOSI MINI-T 2.0 2WD Harden Steel #45 Spur Gear 59T - 1pc set - GPM LM059TS" title="TEAM LOSI MINI-T 2.0 2WD Harden Steel #45 Spur Gear 59T - 1pc set - GPM LM059TS"
alt="TEAM LOSI MINI-T 2.0 2WD Harden Steel #45 Spur Gear 59T - 1pc set - GPM LM059TS" title="TEAM LOSI MINI-T 2.0 2WD Harden Steel #45 Spur Gear 59T - 1pc set - GPM LM059TS"

Precision replacement spur for Mini-T 2.0 centre box

This 59-tooth spur is produced for the LOSI MINI-T 2.0 2WD platform and supplied as model LM059TS. It occupies the centre gearbox main gear position to transmit motor torque through the drivetrain while maintaining accurate engagement.

Manufactured from hardened steel #45, the spur is specified to improve wear life compared with softer materials. Held to precise dimensional limits, the tooth profile is intended to preserve consistent mesh and steady power transfer during typical RC operation.

Workshop guidance: install this spur when a worn or damaged 59T needs replacement, or when you require a steel alternative for higher duty cycles. Confirm pinion alignment and bearing seats in the centre gearbox to avoid uneven load on the teeth.

Packing includes

  • Spur Gear - 1pcs

Original Name / Part No:

LOS212015

What exact role does this spur serve in the centre gearbox?

The 59T spur meshes with the motor pinion to transmit drive through the centre gearbox, acting as the primary output gear for the driveline.

Why is hardened steel #45 specified?

Hardened steel #45 offers improved surface hardness and wear resistance, helping preserve tooth geometry under repeated loading compared with standard plastic components.

Recommended installation checks?

Ensure correct pinion mesh, verify centre gearbox bearings are fully seated, and hand-rotate the drivetrain to confirm consistent engagement before final torqueing of fixings.