LM050RS Hardened Rear CVD Set for MINI-T 2.0 technical upgrade by GPM  [LM050RS]

TEAM LOSI MINI-T 2.0 2WD #45 Harden Steel Rear CVD - 2pc set - GPM LM050RS
Price:
USD$14.90
Brand:
GPM
Model:
LM050RS
GTIN:
4894538360370
Condition:
Brand New
Write a review
alt="TEAM LOSI MINI-T 2.0 2WD #45 Harden Steel Rear CVD - 2pc set - GPM LM050RS" title="TEAM LOSI MINI-T 2.0 2WD #45 Harden Steel Rear CVD - 2pc set - GPM LM050RS"
alt="TEAM LOSI MINI-T 2.0 2WD #45 Harden Steel Rear CVD - 2pc set - GPM LM050RS" title="TEAM LOSI MINI-T 2.0 2WD #45 Harden Steel Rear CVD - 2pc set - GPM LM050RS"
alt="TEAM LOSI MINI-T 2.0 2WD #45 Harden Steel Rear CVD - 2pc set - GPM LM050RS" title="TEAM LOSI MINI-T 2.0 2WD #45 Harden Steel Rear CVD - 2pc set - GPM LM050RS"
alt="TEAM LOSI MINI-T 2.0 2WD #45 Harden Steel Rear CVD - 2pc set - GPM LM050RS" title="TEAM LOSI MINI-T 2.0 2WD #45 Harden Steel Rear CVD - 2pc set - GPM LM050RS"

Technical overview of hardened rear CVDs

The LM050RS rear constant velocity drives are engineered as a precision aftermarket upgrade for 1/18 2WD MINI-T 2.0 stadium truck drivetrains. These CVDs replace simplistic dog-bone-only linkages to deliver smoother articulation, reduced driveline backlash and improved steering clearance under higher steering angles.

Manufactured in hardened steel #45 with documented nutrification and hardening stages, the components focus on material strength and consistent rotational transfer required in high-load RC use. Each drive arm is specified at 50mm from dog-bone end to midpoint, enabling accurate assessment of axle spacing and fit during conversion work.

Installation requires verification of CVD orientation, full dog-bone seating, and secure axle hex engagement. Proper clearance checks for steering and suspension travel are essential. These parts are intended to reduce rear driveline play and to support setups where increased steering sweep is required without binding.

Packing includes

  • CVD - 2pcs

Original Name / Part No:

8354,8351

Compatible Models

  • 1/18 2WD MINI-T 2.0 STADIUM TRUCK-LOS01015

What are the material specifications and heat treatment details?

These CVDs are produced in steel #45 with nutrification and hardening processes to increase surface hardness and fatigue resistance for sustained rotational loads in RC drivetrains.

How should I verify dimensional compatibility?

Measure from dog-bone end to midpoint; the specified 50mm arm length should match your axle spacing. Check dog-bone interface and hex engagement to confirm fit without additional machining.

Recommended maintenance for longevity?

Periodic inspection, debris removal and light lubrication of moving joints are recommended to preserve the hardened surfaces and maintain consistent performance.