Kyosho Motorcycle Precision Alloy Front Wheel KM0504F by GPM  [KM0504F]

Kyosho Motor Cycle Alloy Front Wheel (4 Swirl) - 1pc - GPM KM0504F
Price:
USD$19.90
Brand:
GPM
Model:
KM0504F
Please kindly input your name and email address, we will inform you once we have the restocking.
Write a review

Precision alloy front wheel for Kyosho motorcycle scale applications

This precision alloy front wheel is engineered as a direct replacement for Kyosho motorcycle scale models. The 4-swirl configuration manages radial stiffness and rotating inertia to provide predictable front-end behaviour for tuners and hobbyists.

Fitting follows standard hub procedures: remove the OEM rim, inspect bearing bores and hub tolerances, then install the wheel using the original axle and hardware. After mounting, measure lateral run-out and perform a static balance check to verify alignment and smooth rotation.

From a setup perspective, the wheel is a tuning component: variations in rim mass and rigidity will influence steering feedback, corner entry behaviour, and suspension response. Implement incremental changes and document results for reproducible setup changes in competitive or club-level running.

Specifications

  • Item: Kyosho Motor Cycle Alloy Front Wheel (4 Swirl)
  • Material: Alloy
  • Model Number: KM0504F
  • Compatibility: Kyosho Motor Cycle models

Intended for replacing degraded front rims or for precise handling adjustments; verify bearing seating and axle torque, then validate performance in controlled tests.

Which measurements are critical for compatibility?

Confirm bearing bore diameter, hub flange width and axle clearance. Compatibility requires matching these tolerances to avoid play or binding.

What inspection steps after installation?

Check lateral run-out with the wheel mounted, verify bearing preload and axial play, and perform a low-speed spin test to detect imbalance.

Can this wheel be used for competitive tuning?

Yes, it is suitable as a tuning component; changes to rotating mass and stiffness should be logged and compared against baseline setups for repeatable results.

Recommended maintenance interval?

Inspect bearing condition and wheel balance regularly, especially after heavy use, and replace bearings if wear or play is detected.