Kyosho Mini-Z Overland 32mm Alloy Damper Upgrade with Collars and Ball Screws MOL1332 by GPM  [MOL1332]

Kyosho Mini-Z Overland Alloy Damper With Collars & Screws & Ball Screws ( 32mm)-1pr set - GPM MOL1332
Price:
USD$13.50
Brand:
GPM
Model:
MOL1332
Please kindly input your name and email address, we will inform you once we have the restocking.
Write a review

32mm alloy damper upgrade for Mini-Z Overland

This alloy damper pair is configured for Kyosho Mini-Z Overland use and is delivered as a 1pr set finished in alloy. The kit includes collars, screws and ball screw components so builders can replace standard dampers or apply targeted suspension upgrades on the Mini-Z Overland chassis.

Installation follows established Mini-Z procedures: remove the original dampers from the shock tower and lower mount, transfer any necessary spring cups, then install the alloy damper using the supplied collars and screws. The 32mm specification is shown in the title; verify stroke and mounting geometry before completing the fitment.

For tuning, alloy dampers change damping characteristics and should offer greater durability compared with plastic originals. Collars provide preload and ride-height control while the ball screws reduce lateral play at the end caps for more consistent response during small movements. This component is intended for precise, model-scale suspension tuning during bench setup and track or off-road testing.

What mounting checks should I make before fitting?

Measure shock eye-to-eye spacing and confirm stroke clearance relative to your shock tower and lower mount; check that the 32mm length matches your intended geometry.

Are there recommended fastener practices for these dampers?

Use correct-size hex drivers, apply thread locking where appropriate on metal-to-metal joints, and torque fasteners to avoid loosening while protecting plastic mounting points.

How should collars and ball screws be used during setup?

Use collars to set preload and ride height in small increments, and secure ball screws to minimise lateral end-cap movement for a more consistent damping response across runs.