KYOSHO Mini-Z AWD Rear Wide Alloy Rims MZA603RW/0 11mm (0mm Offset) by GPM  [MZA603RW/0]

Mini-z AWD Alloy Rear Wide Sinkage Rims (6p, 0mm Off set , Width 11mm) - 1pr - GPM MZA603RW/0
Price:
USD$4.72
Brand:
GPM
Model:
MZA603RW/0
Please kindly input your name and email address, we will inform you once we have the restocking.
Write a review

Precision Rear Alloy Rims for Mini-Z AWD

Designed as a rear wheel upgrade for KYOSHO Mini-Z AWD platforms, this item ships as one pair (1pr). The alloy sinkage profile is catalogued as 6p, with a 0mm offset and an 11mm rim width, all of which affect tyre tuck and rear axle clearance.

These rims allow careful rear track adjustment and a tighter tyre sidewall tuck characteristic. On MR-03 AWD chassis the 0mm offset combined with 11mm width repositions the rear wheel without additional spacers, so verify body and suspension clearance prior to installation.

Installation is a direct rim swap for compatible Mini-Z AWD rear hubs: remove existing rims, fit the alloy pair, then confirm axle and suspension movement across full travel. The aluminium construction increases wheel mass relative to plastic rims and can influence rear rotational inertia, so consider tyre pairing and setup adjustments during tuning.

What mounting pattern and fitment should be confirmed?

Confirm hub hex size and bearing compatibility on your KYOSHO Mini-Z AWD chassis, particularly MR-03 AWD, to ensure proper fitment.

What effect does the 11mm width have on handling?

The wider 11mm rim shifts tyre position and can increase sidewall tuck; the added aluminium mass may slightly change rear-end rotational characteristics.

Is extra hardware required to achieve this fit?

No additional offset hardware is typically required since these rims use a 0mm offset; however check body and suspension clearances before running.